NURSERY MACHINES
76Pages

NURSERY MACHINES

PREFACE Egedal Maskinfabrik A/S was founded in 1934. In the first years, they dealt with agricultural machinery and blacksmithing. In 1948, at the request of a local nursery owner, they began to develop and manufacture machines for nurseries. It the developed rapidly to offer quality machines for most common tasks in nurseries, and it did not take many years before the first machines were exported to Scandinavia and Germany and today Egedal machines and equipment are used in most countries in Worldwide. In 1997 we started development and production of machines and equipment for Christmas...

BED HARROW WITH CRUMBLER The Bed Harrow prepares the planting bed in one pass. The slim vibrating spring tines for every 5 cm process the soil, the working depth is adjusted by means of a crumbling drum which at the same time ensures porous and even sowing and planting beds. The Bed Harrow is also suitable for setting up beds. Technical data: Working width: 1100 – 1500 m/m Working depth: 0 – 70 m/m Weight: 110 – 150 kg Standard three-point hitch Power requirement: fra 25 K

BED FORMER The Bed Former is intended for setting up sowing- and planting beds where elevated beds are desired. Lifts the beds up to approx. 200 m/m by means of adjustable top soil plates. Bed width adjustable from 1000 – 1200 m/m. Can be combined with Egedal Bed Harrow. Technical data: Extra equipment: Fittings for combining with Bed Harrow and Drum Bed width: 1000 – 1200 m/m Weight: 320 kg Standard three-point hitch Power requirement: from 50 KW

BED FORMER MASSANO TYPE DRL/DRC Bed Former Massano is intended for setting up seeds and planting beds in one operation, using the machine’s dual rotor system. The front rotor loosens the soil in depth, the rear rotor ensures a fine and slightly compact of the top soil layer (rotate in the opposite direction of travel). Technical data: Extra equipment: Drum hydraulic driven Plastic spreader

STEAM MACHINES Steam machines for environmentally soil disinfection of sowing- and planting beds. Effective steam treatment of the top soil layer for optimal weed control plus treatment against fungus and similar. Special steam shields for the best utilization of the steam generator. Steam machines for 1 – 2 og 3 beds, tractor-towed steam machine or self-propelled. Technical data: 300 to 900 kg/h steam Steam shields: 1200 x 4500 m/m standard 8

BED SOWING MACHINE TYPE 83 Bed sowing machines for sowing of small clean seed such of different rose varieties and up to cherry, conifer and beech (max. diameter of approx. 8 m/m). The sowing quantity is adjustable via the gearbox with 160 gear adjustments. Sowing units with depth and pressure wheel for sowing in rows. Technical data: Extra equipment: Wide sowing unit: 1000 m/m Control seat with fittings Sowing share depth: 50 m/m Working width: 1100 m/m Trac width: 1500 m/m Weight: approx. 250 kg Power requirement: from 25 KW 9

Container liners Wide sowing unit

SOWING MACHINE TYPE COMBI Sowing machine type Combi for sowing of most seeds, for instance ash, oak, chestnut and stratified seeds. Technical data: Band system which ensures exact and even sowing. Sowing share width: 50 m/m The sowing quantity can easily be adjusted via the gearbox of the machine. Sowing box: approx. 280 liters Sowing units with depth and pressure wheels. Large sowing box approx. 280 liters. Extra equipment: Central settings for raised beds. Number of rows: 4-7 Sowing depth: 0-50 m/m Row distance: 200 – 270 m/m Trac width: from 1500 m/m Power requirement: from 36 KW Sowing...

Sowing unit Wide sowing equipment Gearbox Sowing box for small seeds

SAND-SPREADING MACHINE Sand-spreading machine for laying sand and similar on seedbeds. Exact setting of the thickness of the cover layer. Stirring rollers together with the sowing roller ensure an even distribution of the material. Driving dependent dosing from the machine´s support wheel. Technical data: Extra equipment: Trac width: 1300 – 1800 m/m Cubic content: 1 – 2 – 2,5 m3 Towed with drawbar Power requirement: from 36

2 M3 with tracking device

FURROW-MASCHINE TYPE C The Furrow machine is intended for up furrowing of plant furrow for transplanting by hand. Rotation shares ensures a perfect plant furrow. in all soil conditions. Planting after Furrow-machine Technical data:a: Number of rows: C2 – C4 share, 2 – 6 rows C6 share, 2 – 3 rows Working width: max. 1100 m/m Standard three-point hitch Power requirement: from 36 KW Weight: 430 kg Furrow machine share

HOLEDRILLING MACHINE The Hole Drilling machine for drilling plant holes with large capacity. Durable drill with replaceable share. V-belt tension protects against overload. Adjustable depth stops. Technical data: Number of rows: 2 or 4 Drill sizes: 200, 250, 300, 400 and 500 m/m Weight: 350 kg (2-rowed) Standard three-point hitch Power requirement: from 35 KW

TRANSPLANTER TYPE C Transplanter type C is a simple and solid transplanter for planting of vegetables- and nursery plants. The planting wheel ensures a precisely planting and a comfortable working position. The planting units with rubber disc planting wheels, adjustable planting shares, pressure wheels and seat. Technical data: Extra equipment: Number of rows: 1 – 4 standards Row distance: variable min. 500 m/m Planting wheels for bare root plants (gripper planting wheels) Rubber disc planting wheel Ridging discs Side marker Standard three-point hitch Bell marker Power requirement: from 20...

4-rowed type C with 24 gripper planting wheels Rubber disc planting wheel Rubber disc planting wheel Hoes shares

TRANSPLANTER TYPE CP Transplanter type CP is intended for planting of different types of plants, especially well-suited for planting of bare root plants. The transplanter is standard with parallelogram-suspended planting units which ensure an optimal planting depth for each row. Technical data: Standard three-point hitch Power requirement: from 25 KW Row distance: min. 500 m/m Rubber disc planting wheel (standard) Extra equipment: