DIESEL ENGINES

CONTROL UNITS FOR ENGINE CONTROL AND PROTECTION Starts, monitors and protects the diesel engine and stops it in the event of a fault through solenoid valve or electromagnet Shows the main parameters of the diesel engine on the display INSTRUMENTS >> tachometer >> total hour meter >> fuel level indicator >> battery voltmeter TYPE CEP - 09 Complete with four instruments Installation on the machine and in the open >> >> >> Automatic faults surveillance with messages on the display Texts in 6 languages: Italian, English, French, German, Spanish and Portuguese Preheating glow plugs managemen. Dimensions...

AUTOMATIC CONTROL UNIT FOR DIESEL ENGINE FUEL LEVEL INDICATOR WATER OR OIL THERMOMETHER OIL PRESSURE GAUGE BATTERY VOLTMETER TOTAL HOUR METER PARTIAL HOUR METER TACHOMETER STARTING COUNTER STARTING FAILURE COUNTERI Button-controlled start/stop CONNECTION CAN BUS SAE J1939. SERIAL PORT RS 232. Modem GSM (to be mounted externally) to view, on a mobile phone, the instruments of the control unit, to start >> and stop the engine and send an sms message warning >> about an alarm condition. >> PROTOCOL MOD BUS. >> >> >> >> Traditional enginei With CAN-BUS SAE J1939 connection. For engines AIFO: N45ENT...

DCA - 109 Button-controlled start/stop INSTRUMENTS AUTOMATIC CONTROL SWITCH-BOARD FOR DIESEL ENGINE CONTROL UNIT FOR AUTOMATIC DIESEL ENGINE battery voltmeter total hour meter partial hour meter tachometer starting counter starting failure counter fuel level indicator Automatic faults surveillance with messages on the display Texts in 6 languages: Italian, English, French, German, Spanish and Portuguese Remote control (start and stop) Glow plugs preheating management or engine heating, cooling Clock for programming the starting or the stopping of the engine Preventive maintenance warning Programmable...

DCA - 120/10 Button-controlled start/stop INSTRUMENTS AUTOMATIC CONTROL SWITCH-BOARD FOR DIESEL ENGINE CONTROL UNIT FOR AUTOMATIC DIESEL ENGINE fuel level indicator water or oil thermomether oil pressure gauge battery voltmeter total hour meter partial hour meter tachometer starting counter starting failure counteri Possibility of associating 2 relays to various functions CAN Bus SAE J1939 Automatic faults surveillance with messages on the display Texts in 6 languages: Italian, English, French, German, Spanish and Portuguese Remote control (start and stop) Glow plugs preheating management or...

ENGINE PROTECTION DEVICES Start-up with externally installed key The devices are manufactured in containers with reduced dimensions completely embedded in polyurethane resin Front protection class Rear (connections) DEVELOPED TO PROTECT engines by stopping them in the event of fault due to: Too low oil pressure Overheating Inefficient battery charge alternator (belt breakage) Fuel reserve (engine is not stopped) Low coolant level Overfrequency AUTOMATIC BATTERY CHARGERS For lead batteries Battery charge status indicators by led (no possibility to connect to remote signal devices). WITH VOLTAGE...

ELECTRIC HEATERS FOR DIESEL ENGINES We recommend that the engine temperature be kept at appropriate values using the electric heaters even when the engine is not running. As a general rule, the oil or water heaters are required when the ambient temperature drops below 21°C. The benefits are: >> Ability to provide full power quickly >> Minimised engine wear; >> Minimised energy absorption by batteries >> Minimised carbon deposits to ensure easier and more reliable ignition. For applications in contact with the sump Once the heater is assembled in contact with the engine oil sump, it prevents the...

PULL ELECTROMAGNETS FOR DIESEL ENGINES STOPL INTERMITTENT SERVICE CONTINUOUS SERVICE INTERMITTENT SERVICE MAGNETIC TRANSDUCERS SPEED SENSORS LINEAR ACTUATORS Force 30 Kg >> Dashboard and remote control >> Stroke 60 mm (adjustable) via Arandora Star,28/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail: info@elc