MP-1021
20Pages

IRRIGATION MOTOR PUMPS MADE IN ITALY

CONTROL UNITS FOR COMMAND AND PRO FAULTS CAUSING THE MOTOR PUMP TO STOP: too-low oil pressure overheating alternator belt breakage battery overvoltage minimum fuel level low coolant level inadequate pump water pressure pump water overpressure pump water flow failure overspeed fault available low diesel pressure START SYSTEM: key button remote REMOTE MANAGEMENT: via SMS text message via ELCOS SMART CONTROL APP ENGINE RPM ADJUSTER manual automatic system pressure maintenance function engine rpm maintenance function FUNCTIONS/INSTRUMENTS: hour-meter oil pressure gauge engine water or oil...

OTECTION OF IRRIGATION MOTOR PUMPS via Arandora Star,28/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail: info@elcos.it

CONTROL UNIT FOR IRRIGATION MOTOR PUMP CEM-370 TYPE CONVENTIONAL PUMP WATER PRESSURE SWITCH AND GAUGE to be installed externally Start/stop with key Starts, monitors and protects the motor pump and stops it in case of a fault thanks to a solenoid valve or electromagnet. Displays the main motor pump engine parameters. ACCESSORIES AVAILABLE ON REQUEST PUMP WATER PRESSURE SWITCH PRESSURE SWITCH AND GAUGE PUMP WATER SUPPORT FOR BASE ASSEMBLY CRU-003 type via Arandora Star,28/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail: info@elcos.it

CONTROL UNIT FOR IRRIGATION MOTOR PUMP CEM-380 TYPE ELECTRONIC PRESSURE SWITCH with 3m-long cable (supplied standard) Controls the system’s working pressure (range 1–21 bar), doing away with the conventional electromechanical pressure switch. Start/stop with key Starts, monitors and protects the motor pump and stops it in case of a fault thanks to a solenoid valve or electromagnet. Displays the main motor pump engine parameters. On request: SUPPORT FOR BASE ASSEMBLY CRU-003 type THE CONTROL UNIT IS EQUIPPED WITH A PRE-WIRED CONNECTOR Connections are easy and straightforward thanks to the...

CONTROL UNIT FOR IRRIGATION MOTOR PUMP CEM-390 TYPE ELECTRONIC PRESSURE SWITCH with 3m-long cable (supplied standard) Controls the system’s working pressure (range 1–21 bar), doing away with the conventional electromechanical pressure switch. Enables manual adjustment of the engine rpm and automatic slow deceleration before stop, via a linear actuator. VAR-140 type Start/stop with button Starts, monitors and protects the motor pump and stops it in case of a fault thanks to a solenoid valve or electromagnet. Displays the main motor pump engine parameters, including engine water temperature...

CONTROL UNITS FOR IRRIGATION MOTOR PUMP ELECTRONIC PRESSURE SWITCH with 3m-long cable (supplied standard) Controls the system’s working pressure (range 1–21 bar), doing away with the conventional electromechanical pressure switch. Start/stop with buttons Starts, monitors and protects the motor pump and stops it in case of a fault thanks to a solenoid valve or electromagnet. Displays the main motor pump engine parameters. Start Stop On request: SUPPORT FOR BASE ASSEMBLY CRU-003 type via Arandora Star,28/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail:...

CONTROL UNITS FOR MOBILE IRRIGATION SYSTEMS Complete with electronic transmitter (electronic pressure switch) and digital pump water pressure gauge. Start/stop with buttons. They automatically monitor the motor pump with a simple start and, thanks to the digital instruments, they improve reading precision and reliability over time. PANEL ASSEMBLY CIM-132 Includes function that maintains engine rpm as the load on the pump varies CAN BUS CONNECTION Control units are available for engines equipped with electronic injection system control. ELECTRONIC PRESSURE SWITCH with 3m-long cable (supplied...

Remote start option when start-up contact closes Motor pump accelerator control to maintain the system pressure (CIM-130, CIM-131) or engine rpm (CIM-132) constant. CIM-132 > Maintains diesel engine rpm constant as the load on the water pump varies. > Controls the accelerator fitted on the diesel engine (via 2-wire linear actuator) > Can be used on systems for: • water transfer • water boosting • drip irrigation with very low working pressure ZW-SMART SOFTWARE Control units from the CIM13x series offer the option for connection to PC via RS-232 serial cable and programming from the PC using...

CONTROL UNITS FOR MOBILE IRRIGATION SYSTEMS Complete with electronic transmitter (electronic pressure switch) and digital pump water pressure gauge. Start/stop with buttons. They automatically monitor the motor pump with a simple start and, thanks to the digital instruments, they improve reading precision and reliability over time. PANEL ASSEMBLY Includes function that maintains engine rpm as the load on the pump varies Complete with 4G/LTE modem to manage system via SMS text or ELCOS SMART CONTROL platform CAN BUS CONNECTION Control units are available for engines equipped with electronic...

USES YOUR MOBILE PHONE TO MANAGE THE SYSTEM COMMANDS VIA TEXT MESSAGES > Motor pump control option > Issues a warning message when a motor pump alarm is triggered > Option of viewing the control unit’s key instruments Motor pump accelerator control to maintain the system pressure (CIM-136, CIM-137) or engine rpm (CIM-138) constant. CIM-138/4GW > Maintains diesel engine rpm constant as the load on the water pump varies. > Controls the accelerator fitted on the diesel engine (via 2-wire linear actuator). > Can be used on systems for: • water transfer • water boosting • drip irrigation with...

REMOTE IRRIGATION SYSTEM MANAGEMENT SMART CONTROL Browser version also available via Arandora Star,28/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail: info@elcos.it

With the “ELCOS SMART CONTROL” platform you can remotely control and command multiple ELCOS devices at the same time, allowing you to efficiently monitor their use. Compatible control units: CIM-136/4GW, CIM-137/4GW, CIM-138/4GW FEATURES: > Remote control and supervision of multiple units from a single account, via APP (IOS or ANDROID) and WEB BROWSER > Confirmation of commands issued received > On/off command of single motor pump system > Operation mode selection (AUTOMATIC or MANUAL) > Controller-managed faults displayed in text form, even when the APP is off or in background in the form...