• Construction: The grinding mill features a weld-fabricated frame with interchangeable wear plates, a machined rotor on bearings with SNH baseplates, and a tilting cap for hammer and grid access.
• Towing: Equipped with three towing points.
• Drive: Operated by a tractor PTO at 1000 rpm, with pulleys and belts for speed increase. Includes a belt tensioning system with remote lubrication tensioner bearings under removable protective housings.
• Feed: Gravity-fed with a hopper that includes a protective grid.
• Collection of Crushed Products: Utilizes an auger Ø230 driven by a hydraulic motor, with a flow rate splitter for speed adjustment.
• Speed of Rotation: 3000 rpm.
• Hammers: 24 hammers arranged on 6 shafts, mobile and reversible on two surfaces.
• Grids: Semi-circular with chain tensioning system, available with round or oblong holes depending on the cereal type.
• Power Consumption: 120 to 150 HP.
• Sound Level: May exceed 80 dB(A).

• For damp maize (30 to 40% moisture), the F10 "N" processes 18 to 22 tonnes per hour with 120 to 150 HP diesel.

• Universal Joint with friction torque limiter.
• Magnetic shielding in the feed hopper.
• Feed auger with hydraulic or electric motor drive, including a loading hopper with protective grid and flow regulation flap.

Technical specifications are subject to change without notice.

Contact Information: 47170 Poudenas, France. Tel.: +33 (0)5 53 65 73 55, Fax: +33 (0)5 53 97 33 05, Email: [email protected], Website: www.electra.fr