HORIZONTAL HYDRAULIC MIXER MH 1000 "HY"
HORIZONTAL HYDRAULIC MIXER MH 1000 "HY"
- Construction: Equipped with hollow reverse pitch spiral blades and shaft penetration sealed by lip seals. The mixer is covered with a 50 x 50 mesh.
- Equipment: Compatible with 3-point tractor, telescopic coupling, or front loader. Discharge is managed by a slide valve actuated by a hydraulic actuator.
- Drive: Powered by a 200 cc hydraulic motor with a flow divider, operating at a pressure of 160 bars and an oil flow rate of 45 litres/minute. Includes feed and return hoses.
- Transmission: Chain under housing with tension pinion.
- Options: Includes an on-board electronic weighing system with tare and reset functions, and a discharge auger Ø150 driven by a hydraulic motor, controlled by a solenoid control valve.
- Overall dimensions vary depending on configuration, with key measurements including a maximum load of 500 kg, useful capacity of 1000 litres, and a weight of 600 kg.
- Features very short mixing time and excellent uniformity due to the reverse pitch spiral blades.
- Suitable for mixing complete, rolled, or crushed cereals with pulps and nitrogenated additives.
- Ideal for continuous trough feeding with a variable-speed discharge auger.
Catalog excerpts
HORIZONTAL HYDRAULIC MIXER MH 1000 "HY" FOR MIXING: COMPLETE, MILLED OR ROLLED CEREALS, PELLETS MOLASSES, CHOPPING OF DAMP AND FULLY NITROGENATED CEREAL GRAINS
Open the catalog to page 1
OVERALL DIMENSIONS With discharge auger HEIGHT OF LOWER COUPLING MAX LOAD IN kg USEFUL CAPACITY IN LITRES WEIGHT IN kg
Open the catalog to page 2
SPECIFICATIONS CONSTRUCTION hollow reverse pitch spiral blades sealing of shaft penetration by lip seals mesh covering 50 x 50 3-point tractor or telescopic coupling or all makes of front loader discharge from the bottom by slide valve actuated by hydraulic actuator; 200 cc hydraulic motor with flow divider, working pressure 160 bars, oil flow rate 45 litres/minute feed and return hoses by chain under housing with tension pinion - on-board electronic weighing system with indicator in pivoting plastic box. Functions: tare and reset discharge auger Ø150 driven by hydraulic motor and flow divider,...
Open the catalog to page 3
EXAMPLE ADVANTAGES Very short mixing time and excellent uniformity by virtue of the 2 reverse pitch spiral blades. Totally suitable for mixing complete, rolled or crushed cereals with pulps, pellets nitrogenated additives. Ideal for continuous trough feeding due to the variable-speed discharge auger. The technical specifications may be subject to change without notice
Open the catalog to page 4All Electra catalogs and technical brochures
GRINDING MILL F10 "N"4 Pages
GRINDING MILL BC - BC "S"5 Pages
FARMI GRINDING MILL2 Pages
MINI GRINDING MILL2 Pages
MAIZE THRESHER2 Pages
GRINDING MILL F34 Pages
LUMP BREAKER E 6002 Pages
ROLLER MILL " API 1 "4 Pages
