Bagging and Transport equipment Transport Conveyor Bulk transport Machine Transport conveyor The transport conveyor transports powder and granular materials. The material is discharged into the hopper of the conveyor. This intake hopper has rubber-closing plates to reduce material loss. When worn out, these plates can easily be removed. The conveyor is built up of chopped stainless steel U-profiles. The frame exists of sections that are bolted together. Cross bracings strengthen the frame. The halve moon PVC belt has small anti return roll bridges and is oil and chemical resistant. The conveyor belt rolls on stainless steel rollers and it stays in place due to nails. The Tri-Rollers at the upper part of the conveyor frame consists of 3 sections; 1 middle roller and 2 side rollers, this gives the belt a V-shape. The rollers are bolted to the conveyor frame. A drive roller with antiskid rubber covered rollers drives the conveyor belt. This ensures that the conveyor belt is always centred. A motor with V-Belts transmission drives the drive roller. The return roller is mounted on two bearings, one on each side and is adjustable with a stretcher at two sides. This makes it possible to regulate the tension of the conveyor belt. A stainless steel chute at the end of the conveyor discharges material downwards. The transport conveyor has a capacity of 160 ton/m³ per hour. This product can be adjusted to customer demands. EMT - Mr. Gustaaf Zeeman Molenpad 10, 1756 EE, ‘t Zand N.H. The Netherlands

Molenpad 10 1756 EE 't Zand N.H. The Netherlands \E^M/ng,\ W / Ba Bagging and Transport equipment Tel.: +31 (0)224 591213 www.emt.tech email: [email protected] Example Vertical & low Profile portable bagging installation Low Profile Portable Unit Top View Transport Conveyor Transport conveyor