For potato and vegetable processINg Receiving Hoppers RH K, RH S For intake of potatoes, onions, carrots etc from trucks and trailers RH 12S for side tipp. Adjustable tipping device. RH 12K and RH 12S receiving hoppers are primarily designed for use with side-tipping trucks and trailers, but may also be used with rear-tipping vehicles. The RH 12K starts flat and then slopes. The flat section can be matched to individual requirements. The RH 12S consists of a number of sloping sections joined to one another. The number of sections can be adapted to meet EMVE I ÅSTORP AB P.O. Box 144 265 22 ÅSTORP, Sweden individual requirements. The RH 5K is a shorter hopper designed for applications where capacity requirements are smaller. Intake is normally from an overhead BT box turner mounted on a traveller to ensure optimum filling. Where only rear-tipping vehicles are to be used, please see separate data sheet for RH 2000 and RH 2700 hoppers.

Standard versions of the receiving hoppers are fitted with simple tipping protectors, adjustable for height to match the height of the truck/trailer. To give optimum results, the protector can be supp- lied complete with pneumatic up/ down and in/out controls. Tipping surfaces are covered with shockabsorbent rubber. The hoppers can also be fitted with automatic flow control to ensure as consis- tent a feed rate as possible to the receiving system. All versions of the hoppers can be built to individual specifications, for use in existing buildings. Återförsäljare: Soil extractor/Graders Box filler...