- Catalogs
- Enduramaxx
- 100L Slim dosing bund
100L Slim dosing bund
100L Slim dosing bund
- Design Pressure: Atmospheric
- Design Temperature: 40°C
- Working Pressure: Atmospheric
- Working Temperature: 40°C
- Moulded Lifting Lugs: 4 positions at 0°, 90°, 180°, and 270°
- Method of Support: Firm, flat, fully supporting base of concrete or other suitable material
- Material: Matrix Revolve N-307
- Properties: High density (0.939 g/cm³), low melt (3.5 g/10 min) hexene polyethylene grade for rotomoulding
- Protection: Fully protected against thermal and light degradation, UV10 stabilised
- Works Test: All tanks are thickness tested by ultrasound after demoulding
- Additional Tests: Air supported leak tests are carried out on flange lines
- Slim bund designed to suit 100L dosing tank
Catalog excerpts
DESIGN DATA 100L Slim dosing bund MAXIMUM CAPACITY (LTRS): L DESIGN TEMPERATURE: 40°C WORKING PRESSURE: ATMOSPHERIC WORKING CAPACITY (LTRS): L APPROX. WEIGHT FULL (KGS): kg DESIGN PRESSURE: ATMOSPHERIC APPROX. WEIGHT EMPTY (KGS): kg MOULDED LIFTING LUGS: 4 - 0°, 90°, 180° & 270° METHOD OF SUPPORT: FIRM, FLAT, FULLY SUPPORTING BASE OF CONCRETE OR OTHER SUITABLE MATEREAL MATERIAL DATA MATERIALS OF CONSTRUCTION: MATRIX REVOLVE N-307. REVOLVE IS A HIGH DENSITY (0.939 g/cm3), LOW MELT (3.5 g/ 10 min) HEXENE POLYETHYLENE GRADE FOR ROTOMOULDING. THE GRADE IS FULLY PROTECTED AGAINST THERMAL AND LIGHT DEGRADATION: N-307 IS UV10 STABILISED. INSPECTION AND TESTING WORKS TEST: ALL TANKS ARE THICKNESS TESTED BY ULTRASOUND AFTER DEMOULD IN ADDITION AIR SUPPORTED LEAK TEST ARE CARRIED OUT ON FLANGE LINES. NOTE SECTION B 3RD ANGLE PROJECTION DO NOT SCALE DRAWING Slim bund to suit 100L dosing tank
Open the catalog to page 1All Enduramaxx catalogs and technical brochures
4500L Vertical tank1 Page
1000L Slimline tank1 Page
Think Tank.1 Page
