Welded frame construction Pockets for lifting cylinder intake at the top on both sides Integrated remote control Prepared for relieving spring fixture

Rocker arm made out of spheroidal graphite cast iron GGG 50 Rocker arm pivot secured against rotation Pivots greasable Safely installed hydraulic system

Welded frame construction Pockets for lifting cylinder intake at the top on both sides Integrated remote control Prepared for relieving spring fixture

Rocker arm made out of spheroidal graphite cast iron GGG 50 Rocker arm pivot secured against rotation Pivots greasable Safely installed hydraulic system

Welded frame construction Pivots greasable Integrated remote control

FH 4.8 to Intake for lifting cylinders at the bottom secured against rotation Prepared mounting of hydraulic connectors and 7 pole socket Top link bolt secured against rotation

Welded frame construction Integrated remote control Hydraulic mounting kit for rear control unit

Prepared mounting of hydraulic connectors and 7 pole socket Hydraulic mounting kit for rear control unit

Welded frame construction Integrated remote control Hydraulic mounting kit for rear control unit

Prepared mounting of hydraulic connectors and 7 pole socket Hydraulic mounting kit for rear control unit

Degenhart compared to our competitors Degenhart yes Welded frame construction Front Hitch pre-mounted Cover plate double edged for higher stability Cranked side plates to ensure full steering angle Multi-valve single-acting/double-acting/locked Reducing throttle optional Lifting height specific to tractor model FH connected to either rear-/ or mid-mount control unit Remote control 6R integrated Side plates with maintenance opening Integrated start modulation Oil-cooler necessary No interference when changing the belt Front PTO can be retrofitted without problems Ernst Degenhart GmbH · Gewerbestraße...