C 960
C 960
- Venturi System: Enhances chip discharge without using energy-consuming paddles, preserving engine power for chipping and reducing dust and debris.
- Power Options: Available with a diesel motor or an electro motor for stationary use, maintaining the same specifications and output while reducing energy consumption.
- Infeed Table: An optional longer infeed table facilitates easier feeding of voluminous materials.
- Power: Up to 275 hp (diesel) or 200 kW (electric).
- Output: Up to 120 m3/h, depending on material.
- Infeed Opening: 900 x 600 mm.
- Drum Diameter: 1000 mm with knives.
- Feed Wheels: Upper: 500 x 850 mm; Bottom: 300 x 850 mm.
- Drum Speed: 1000 to 1200 rpm.
- Weight: 7,000 kg including engine and table.
- General: Includes Europe controller with PLC, remote control, and various customization options.
- Transport: Single or tandem axle with hydraulic or air brakes, truck mount frame, and more.
- Crane: Europe Forestry Crane options with various controllers and mounting configurations.
Catalog excerpts
THE EC 960 IS PERFECT FOR LIGHT INDUSTRIAL WORK. IT DOES 120 M3/H AND THE SIZE OF THE WOOD CHIPS CAN BE EASILY CHANGED. IT IS COMPACT ENOUGH TO BE TAKEN ANYWHERE, BE IT INTO THE WOODS OR NEXT TO A HIGHWAY.
Open the catalog to page 2
The EC 960 is equipped with a Venturi system. The Venturi system blows additional air in the funnel behind the drum for smooth discharge of chips through the chute. As this system does not use energy consuming paddles, more engine power is available for chipping wood and the wood chips are not damaged. Another benefit is that there will be little to no dust and debris when chipping. A more uniform chip size is then created. This energy-efficient system ensures a more enjoyable chipping experience. If you prefer to chip wood stationary you can also choose to go with an electro motor instead of...
Open the catalog to page 3
EC 960 EC 960e EC 960 PTO FRONT VIEW SIDE VIEW TRACKS SIDE VIEW TANDEM AXLE Power Up to 275 hp Up to 200 kW Up to 275 hp Output Up to 120 m3/h, depending on material Drum diameter 1000 mm, including knives Upper feed wheel 500 x 850 mm (diameter x width) Bottom feed wheel 300 x 850 mm (diameter x width) Drum rotation speed Between 1000 and 1200 rpm Knives 3 pcs on drum and 1 pc counter knife Weight 7.000 kg, including engine and table Specifications Long pipe of 4 m w/ Venturi configuration. Automatic no-stress system. Emergency stop on both sides. Manufactured...
Open the catalog to page 4
