Calcicoat – Calcium Chloride Product data sheet General Description Product Specification CALCICOAT™ Calcium chloride (CaCl2) when in solution is a strong salt solution. Protective clothing, rubber gloves and eye protections are recommended. Rubber safety boots should also be worn in work areas. Before using this product refer to the MSDS for complete safety and handling guidelines. For proper disposal guidelines for calcium chloride wastes, consult the appropriate local regulatory authorities. Store in tightly closed, airtight containers. Store in closed, cleaned, dry and well-ventilated place. Keep away from incompatible substance such as moisture, zinc, steel and materials that support consumption such as oxidizing agents. Product is hygroscopic so protect them against atmospheric moisture. This product is subject to deterioration during storage, the presence of water, humidity will accelerate this deterioration so protect against water and humidity. Protect against heat (don’t store above temp. 30C). Keep away from direct sunlight. Protect against physical damage. Don’t put the product directly on the floor, Stored the product on pallets. Ensure that local, federal and national legislation on storage conditions are observed. Chemical Analysis. Item Unit CaCl2 % MgCl2 % Test Method Complexometric Complexometric Physical Analysis. Item Bulk Density Moisture Content Test Method Solubility Test pH meter by weight Moisture Meter Ref. Internal Internal Internal Internal Test Method CALCICOAT™ Calcium chloride is used in petroleum industry as drilling mud additive and drying petroleum fractions, in cement manufacture to low alkali and acting as a source of chloride. To melt the Highway ice for sidewalks, parking lots and driveways. This high energy should be sprinkled lightly and evenly over ice surfaces at an application rate of about 2 pounds per 200 square feet. Thawing begins immediately. CaCl2 White Granules Calcicoat Sieve analysis General Chemical Formula Appearance Internal Code Particle Size CALCICOAT™ calcium chloride (CaCl2) is a white, high purity granules with 94 to 97 weight percent CaCl2. It has the following features when compared to its nearest competitor:  When sprayed, the shape of granules makes them more controllable than powder shape.  Higher concentration of calcium chloride gives a higher heat of dissolution, promoting faster melting and higher penetration rate as a deicer. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. Further, nothing contained herein shall be taken as a recommendation to manufacture or use any of the herein described materials or processes in violation of existing or future patents.