General Overview

This document is a detailed spare parts catalog for the ORLIK tillage aggregate with a 3-meter working width, published by EXPOM Sp. z o.o. in Poland (November 2011). It serves as a multilingual reference (Polish, English, German) for maintenance, repair, and procurement of components.

Main Sections and Assemblies

1. Central Frame Assembly (3m)

• Includes the central frame, upper headstock, arms, pins, screws, lock nuts, and split pins.
• Key parts: Central frame (AGP30-30.00.01.00), upper headstock (AGP30-22.00.01.00), pins (e.g., 31x142 mm), and standard fasteners (M24x60 screws, M24 lock nuts).

2. Cultivator Version (3m)

• Components: central frame, consoles, U-bolts, tines (32x10 mm), tine reinforcements, clamps, shares, and metric fasteners (M16, M12, M10).
• Notable parts include reinforced cultivator tines and clamps.

3. Disc Version (3m)

• Includes right and left cutter disc sets (12 pcs each), front/rear disc beams, disc holders, brackets, 560 mm diameter cutter discs, rubber rollers, disc axles, tapered roller bearings (32007X, 30206), oil seals, slotted nuts, O-rings, plugs, grease nipples, and fasteners.

4. Lifting Assembly (3m)

• Consists of upper beam, lower/rear arms, hooks, stop wing, pins (various lengths), special screws (M20), standard fasteners, washers, spring and split pins, and cable line.

5. Roller Assembly (3m)

• Includes roller arm, upper bracket, main roller frame, cage roller (2944 mm), packer roller (2944 mm), roller scrapers, U-bolts, flange bearings (UCF 210), screws, nuts, washers, and scrapers.

6. Hydraulic System (3m)

• Hydraulic cylinder (CJ2F-80/45/500z), hoses, sealing connectors, copper seals, quick coupling ball valves, dust caps, and grease nipples.

7. Protective Covers and Plates

• Left/right side covers, plates, bracket assemblies, arms, springs, screws, lock nuts, washers, and fastening elements.

Key Specifications and Standards

• Fasteners comply with Polish and DIN standards: PN-85/M-82101 (screws), PN-86/M-82176 (lock nuts), PN-78/M-82008 (spring washers).
• Bearings and seals conform to industry norms with precise dimensions.
• Each part is uniquely identified by catalog numbers for accurate ordering and reference.

Usage and Maintenance Recommendations

The catalog supports correct identification and replacement of worn or damaged parts to maintain optimal ORLIK tillage aggregate performance. It emphasizes using specified parts and adhering to recommended fastener torque and assembly procedures (implied by part specifications).

AGREGAT ORLIK Side Covers Parts List

1. Parts Identification and Description

• Unique catalog numbers (e.g., AGP30-32.01.00.00) with names in Polish, English, and German.
• Includes left/right side covers, plates, arms, springs, screws, nuts, washers, and split pins.

2. Quantities and Standards

• Specified quantities per assembly (mostly 1 or 2).
• Fasteners conform to Polish standards: PN-85/M-82101, PN-86/M-82176, PN-78/M-82005.
• Detailed dimensions for screws and washers (e.g., M12x40 screws, washers Ø13, Ø25, Ø21).

3. Key Components and Parameters

• Side covers: Left (AGP30-32.01.00.00) and Right (AGP30-32.02.00.00).
• Mounting plates and brackets.
• Springs (dimensions 4x34x190) specified by supplier.
• Lock nuts, washers, and split pins (Ø6.3x63).

4. Notes and References

• References Table 7 for additional details.
• Catalog date: November 20, 2011.

Summary and Best Practices

This catalog is an essential resource for maintenance, procurement, and assembly teams working with the ORLIK tillage aggregate and its side covers. It ensures compatibility and quality by specifying standardized parts and fasteners, with multilingual naming supporting international use.

Best Practices:

• Use parts strictly according to specified standards to ensure safety and performance.
• Verify quantities and part numbers before ordering or assembly.
• Follow dimensional specifications for fasteners and washers to prevent mechanical failures.