Catalog excerpts
EURO C3 - C3MAX Thanks to our constant commitment and spirit of innovation, our “C3” battery has become perfect for 21st-century avicultural production, as it optimises the relationship between animal density and cage volume, thereby complying with the required restrictions in terms of size. The ease of installation and lack of structural limits makes it ideal for reclaiming preexisting industrial facilities. REGULATIONS Directive 1999/74/EC of the European Council dated 19 July 1999. The batteries meet the criteria required for new installations starting from 1 January 2002, that is: •...
Open the catalog to page 2EURO C3 that are (63.5cm deep). There are two different available setups. TYPE “C”: the module consists of two different cells divided by a longitudinal mesh partition. Each cell has a usable 2 / animal). TYPE “D”: the module consists of a fully open single cell 40 hens (762 cm2/ animal). EURO C3MAX The “EURO C3 MAX” battery derives from the “EURO C3” one and has the same module length (2.4cm), though it is deeper (78.2cm). A special feature of the “MAX” battery is the feeder inside the module, which ensures compliance with the regulation with 50 animals/module (compared with the 40 of EURO...
Open the catalog to page 3NEST In accordance with European directives there is an area intended to be used as a nest. To create a warm contact surface inside the nest, the wire mesh is covered with a special mat means it is always kept clean. The mat has hooks to attach it to the wire mesh without having to use clips. This allows you to quickly remove it and also quickly place it back when cleaning the batteries. The walls of the nest are made with a very resistant material and are red, a colour that has proved to be very popular among hens. EGG COLLECTION Most of the eggs are laid near the nest and this is why the...
Open the catalog to page 4PERCHES The perches are placed longitudinally in relation to the battery and in parallel in relation to each other inside the module, so as to avoid any obstacles and overlaps animals to move around inside the cage and would encourage the formation of dirty recesses. The height is designed to allow animals to access the whole surface of the cage. Treading on the bottom of the cage does not ensure it is cleaned as a result. The perches are made of metal that has been specially treated to ensure high resistance, while their round cross-section ensures they are kept clean. CLAW FILING milled...
Open the catalog to page 5ROAMING AREA The roaming mat is made of a rigid, smooth plastic material attached directly to the bottom of the cage to ensure it always remains clean and does not allow manure to build up. With the special hooks, it just takes a few seconds to place the mat and remove it. DRYING removal belt. ACCESSORIES Additional feeder (only for the MAX model). Additional feeder with a grid whose shape and size prevents wasting feed and dirt/ manure from stagnating where the animals eat.
Open the catalog to page 6TECHNICAL FEATURES EURO C3 - C3MAX EURO C3 HENS UNIT/LEVEL The “EURO C3” model measures 2.4 m at the front and is 1.27 m deep; it can be used for various solutions: Type C) 2 compartments per module, each measuring 2.4 m at the front and 63.5 cm deep for 20 hens; Type D) 1 compartment per module, measuring 2.4 m at the front and 1.27 m deep for 40 hens. Each compartment has a nest, perch and litter. LEVELS “A” CLAW FILING SYSTEM HENS UNIT/LEVEL The “EURO C3 MAX” model measures 2.4 m at the front and is 1.564 m deep; it can be used for various solutions: Type C) 2 compartments per module,...
Open the catalog to page 7Via Venezia, 30 35010 Marsango (Padova) Italy Tel. Fax +39 049 9630605 facco@facco.net www.facco.net
Open the catalog to page 8All FACCO catalogs and technical brochures
-
C5 LAYER SYSTEM
5 Pages
-
MAGNUM
4 Pages
-
C3 Layer
4 Pages