MAGNUM P./SUPER MAGNUM P.

Product catalog summary

Technical Specifications:
The SUPER MAGNUM 7000/P features 2 + 2 hydraulic cylinders for rear roller and levelling bar adjustments. It includes a central gearbox T 331 A without rear PTO and two lateral gearboxes MZ 827 F with manual gear change, achieving a gear ratio of 27-43 and 338 rpm on the rotors. The machine is equipped with a cardan shaft with an automatic torque limiter and a rear levelling bar with cranks between blades and roller. Blade thickness is 18 mm, and it includes CE safety guards.

Operational Features:
The folding power harrow uses synchronized hydraulic cylinders to lock wings in a vertical transport position with a single lever operation. It can be set to a floating position to adapt to ground contours.

Additional Features:
Includes stone protection, a quick release system for blades, and round blade holders for stone guard fitting. Compatible with 3rd category hitches.

Dimensions and Power Requirements:
Working width is 7080 mm (278.75 inches) and weight is 4920 kg (10847 lbs). Requires 170 - 350 HP.

Specifications:
1. MAGNUM/P: Central gearbox T 301 with no speed change, two lateral gearboxes DV 817 with manual gear change (24-32 tooth gears, 362 rpm).
2. SUPER MAGNUM/P: Central gearbox T 331 A with no speed change and no rear PTO, two lateral gearboxes MZ 827 F with manual gear change (27-43 tooth gears, 338 rpm).
3. Cardan Shaft: Automatic torque limiter, fork 1 3/8, 21 splines.
4. Rear Levelling Bar: Cranks between blades and roller.
5. Blade Holders: Round holders for stone guard installation.
6. Hitches: 3rd category with corresponding axles.
7. Hydraulic Device: For blocking harrows during road transport.
8. Blade Thickness: 18 mm.
9. Safety Guards: CE certified.

Procedures:
The folding power harrow uses synchronized hydraulic cylinders for folding/unfolding. A single lever unlocks transport hooks to unfold the machine. The reverse process is used for folding. Machine halves can float independently to adapt to ground contours.

Norms and Recommendations:
All equipment is CE certified for safety. Technical data, features, and illustrations are indicative and non-binding.

Key Features:
- Quick release system for blades.
- Blades cross by 15 mm in the middle for complete soil work.
- Standard hydraulic cylinders for adjusting rear rollers and levelling bars.

Technical Data:
- MAGNUM 5000/P: 20 blades, 5112 mm width, 3650 kg, 160-240 HP.
- MAGNUM 6000/P: 24 blades, 6096 mm width, 4080 kg, 170-240 HP.
- SUPER MAGNUM 5000/P: 20 blades, 5112 mm width, 3770 kg, 160-350 HP.
- SUPER MAGNUM 6000/P: 24 blades, 6096 mm width, 4200 kg, 170-350 HP.
- SUPER MAGNUM 7000/P: 28 blades, 7080 mm width, 4920 kg, 170-350 HP.

Catalog excerpts

ERPICE ROTANTE PIEGHEVOLE HERSE ROTATIVE PLIABLE FOLDING POWER HARROW KLAPPBARER KREISELEGGE GRADA ROTATIVA PLEGABLE СКЛАДНЫЕ РОТОРНЫЕ БОРОНЫ

Open the catalog to page 1

CAMBIO RAPIDO DEI COLTELLI ATTELAGE RAPIDE DES COUTEAUX CAMBIO RÁPIDO DE LAS CUCHILLAS QUICK RELEASE SYSTEM FOR BLADES БЫСТРАЯ ЗАМЕНА НОЖЕЙ

Open the catalog to page 2

MAGNUM P. - SUPER MAGNUM P. I due pistoni per chiudere e aprire i 2 erpici sono "sincronizzati" col pistone che blocca (a mezzo ganci) le due macchine in posizione verticale di trasporto. L'utilizzatore ha quindi una sola leva da azionare. Mettendo la macchina in posizione di lavoro: prima entra in funzione il pistone che apre i ganci di blocco, poi entrano in funzione i due pistoni che "aprono" le due macchine. "Chiudendo" la macchina accade il contrario. E' possibile rendere "oscillanti" le due macchine. Die Beiden Klappzylinder der Maschine sind synchron zum Verriegelungszylinder, welche die...

Open the catalog to page 3

1. MAGNUM P.: riduttore centrale T 301 senza cambio + N° 2 riduttori laterali DV 817 con cambio manuale degli ingranaggi. Coppia inserita 24 – 32 = 362 g/m. 2. SUPER MAGNUM P: riduttore centrale T 331 A senza cambio, senza P.T.O. posteriore, + N° 2 riduttori laterali MZ 827 F con cambio manuale degli ingranaggi. Coppia inserita 27 – 43 = 338 g/m. 3. Albero cardanico con limitatore automatico, forcella1 3/8”, scanalati n°21. 4. Barra livellatrice posteriore con manovelle, fra coltello e rullo. 5. Supporti coltelli rotondi con la conseguente possibilità di montare la protezione sassi. 6. Attacchi...

Open the catalog to page 4

Il SUPER MAGNUM 7000/P è Il SUPER MAGNUM 7000/P è equipaggiato di serie serie con 2 + 2 equipaggiato di con 2 + 2 martinetti idraulici per regolare i rulli i rulli martinetti idraulici per regolare posteriori, e 2 + e 2 + 2 martinetti idraulici posteriori, 2 martinetti idraulici per regolare la barrabarra livellatrice. per regolare la livellatrice. La SUPER MAGNUM 7000/P La SUPER MAGNUM 7000/P est est équipée de avec 2 + 2 + 2 vérins équipée de série série avec 2 vérins hydrauliques le le réglage hydrauliques pour pourréglage du du rouleau arrière, + rouleau arrière, et 2 et 22 + 2 vérins vérins...

Open the catalog to page 5

FILOGRAF Arti Grafiche s.r.l. - Via N. Sacco, 34 - FORLÌ - 07/2016 I dati tecnici, le caratteristiche e le illustrazioni sono indicative e non impegnano il costruttore. - Les données techniques, les caracteristiques et les illustrations sont indicatives et n’engagent pas le constructeur. - The technical data, features and pictures are indicative and do not bind the manufacturer. - Die technische Angaben die Merkmale und die Bilder sind weisend und verbinden nicht den Hersteller. - Los datos técnicos, las caracteristicas y las ilustraciones son indicativas y no comprometen al constructor. - Технические...

Open the catalog to page 6