Press screw separator PSS 5.2-1040
6Pages

{{requestButtons}}

Catalog excerpts

Press screw separator PSS 5.2-1040 - 1

Press Screw Separator PSS

Open the catalog to page 1
Press screw separator PSS 5.2-1040 - 2

FAN Press Screw Separator PSS The PSS is fed by pump or gravity from a holding tank. It is also The FAN Press Screw Separator PSS possible to feed the PSS by hopper. The optimal feeding method depends on the raw material consistency and the site conditions. • The FAN PSS can handle thick (20% solids) as well as thin slurries (down to 0.1% solids) • Dryness of the separated solids can be adjusted between 25% and 55% TS (depending on application Inside of the inlet section, an oscillator unit (patented) inducts oscillating pressure into the liquid. This leads to an improved performance and a...

Open the catalog to page 2
Press screw separator PSS 5.2-1040 - 3

Agricultural applications: Solid-liquid separation of pig, cattle and poultry manure for • Volume reduction • Odour reduction • Nutrient reduction • Easier irrigation • Reuse of solids for bedding • Reuse of liquids for flushing • Cleaning of lagoons • Composting of solids • Further slurry treatment possibilities Biogas and bio-ethanol plants: • Solid-liquid separation before and after biological treatment Slaughterhouse applications: • Waste water treatment and fibre recovery • Dewatering of paunch and intestines • Separation of pig manure, straw, sand, shavings and stomach contents •...

Open the catalog to page 3
Press screw separator PSS 5.2-1040 - 4

Oscillator Inlet, 4“ Gearmotor Stand 9 Exit for separated liquid, 5“ 10 Counterweight 11 Separated solids Auger Screen Mouthpiece Output regulator Major patent rights Separation principles (Patent EP 0 367 037 / USA Patent No. 5, 009, 795) consisting of: - relationship between of screen diameter and auger pipe diameter is designed that a hollow cylindrical solid plug is produced - transfer of tangential force from the screen via guide rails - screen construction, made of screen bars - output regulation with flaps and weights for regulating dryness of cake Oscillator system (Patent EP 0 443...

Open the catalog to page 4
Press screw separator PSS 5.2-1040 - 5

Special features of the FAN Press Screw Separator Flushing device in PSS for separation of waste water e.g. in slaughterhouses The FAN PSS machines are equipped with a flushing device inside the PSS between screen and housing for separating waste water from the slaughtering process in abattoirs. With this device the screen will be flushed with hot water under pressure in intervals, which are for each application adjustable. Herewith the screen will be continuously kept clean and prevents that grease blocks the screen when the machine is not in operation. Specially designed augers for various...

Open the catalog to page 5
Press screw separator PSS 5.2-1040 - 6

FAN Bedding Recovery Unit FAN Dissolved Air Flotation Unit FAN Submersible Pump CSPH FAN Centrifuge Classifier Separator FAN Filter Oscillating Separator g FAN Separator GmbH Bernecker Strasse 5, D-95509 Marktschorgast, Germany Phone: +49 9227 938 - 400, Fax: +49 9227 938 - 444 www.fan-separator.de Central stock: Kowaldstrasse 2, 8570 Voitsberg, Austria Subject to change / Press Screw Separator PPS / 12 2012 e

Open the catalog to page 6

All FAN Separator GmbH catalogs and technical brochures