Pressschnecken Separator PSS 1.2-780

Product catalog summary

Overview: The FAN Press Screw Separator (PSS) is a versatile machine designed for solid-liquid separation in various industries, including agriculture, biogas, slaughterhouses, food processing, and pulp and paper. It is capable of handling both thick and thin slurries and is constructed primarily from stainless steel for durability.

Specifications: The PSS can process materials with solid content ranging from 0.1% to 20%. The dryness of the separated solids can be adjusted between 25% and 55% total solids (TS). The machine is designed for high capacity and low power consumption, with models offering capacities from 40 to 350 m3/h depending on the model and application.

Key Features: The PSS includes a patented oscillator unit to enhance performance and capacity, a hard-coated auger for longevity, and a screen that is continuously cleaned by the auger. The machine also features a patented output regulator to adjust the dryness of the solid cake.

Applications: The PSS is used in agriculture for manure management, in biogas plants for pre- and post-treatment, in slaughterhouses for wastewater treatment, and in the food industry for processing various waste streams. It is also applicable in the pulp and paper industry for sludge dewatering and fiber recovery.

Technical Innovations: The PSS features a newly designed inlet housing with a tooth-system to prevent blockages, adjustable straw bolts to reduce wear, and an exchangeable body protection ring. Specially designed augers are available for different materials, including those with abrasive or sticky properties.

Maintenance and Operation: The PSS requires minimal maintenance and no special training for operation. It is equipped with a flushing device for cleaning, particularly useful in slaughterhouse applications to prevent grease build-up.

Conclusion: The FAN Press Screw Separator is a robust and efficient solution for various industrial separation needs, offering flexibility, durability, and ease of use.

Catalog excerpts

Press Screw Separator PSS

Open the catalog to page 1

FAN Press Screw Separator PSS The PSS is fed by pump or gravity from a holding tank. It is also The FAN Press Screw Separator PSS possible to feed the PSS by hopper. The optimal feeding method depends on the raw material consistency and the site conditions. • The FAN PSS can handle thick (20% solids) as well as thin slurries (down to 0.1% solids) • Dryness of the separated solids can be adjusted between 25% and 55% TS (depending on application Inside of the inlet section, an oscillator unit (patented) inducts oscillating pressure into the liquid. This leads to an improved performance and a higher...

Open the catalog to page 2

Agricultural applications: Solid-liquid separation of pig, cattle and poultry manure for • Volume reduction • Odour reduction • Nutrient reduction • Easier irrigation • Reuse of solids for bedding • Reuse of liquids for flushing • Cleaning of lagoons • Composting of solids • Further slurry treatment possibilities Biogas and bio-ethanol plants: • Solid-liquid separation before and after biological treatment Slaughterhouse applications: • Waste water treatment and fibre recovery • Dewatering of paunch and intestines • Separation of pig manure, straw, sand, shavings and stomach contents • Dewatering...

Open the catalog to page 3

Oscillator Inlet, 4“ Gearmotor Stand 9 Exit for separated liquid, 5“ 10 Counterweight 11 Separated solids Auger Screen Mouthpiece Output regulator Major patent rights Separation principles (Patent EP 0 367 037 / USA Patent No. 5, 009, 795) consisting of: - relationship between of screen diameter and auger pipe diameter is designed that a hollow cylindrical solid plug is produced - transfer of tangential force from the screen via guide rails - screen construction, made of screen bars - output regulation with ﬂaps and weights for regulating dryness of cake Oscillator system (Patent EP 0 443 385...

Open the catalog to page 4

Special features of the FAN Press Screw Separator Flushing device in PSS for separation of waste water e.g. in slaughterhouses The FAN PSS machines are equipped with a ﬂushing device inside the PSS between screen and housing for separating waste water from the slaughtering process in abattoirs. With this device the screen will be ﬂushed with hot water under pressure in intervals, which are for each application adjustable. Herewith the screen will be continuously kept clean and prevents that grease blocks the screen when the machine is not in operation. Specially designed augers for various application...

Open the catalog to page 5

FAN Bedding Recovery Unit FAN Dissolved Air Flotation Unit FAN Submersible Pump CSPH FAN Centrifuge Classiﬁer Separator FAN Filter Oscillating Separator g FAN Separator GmbH Bernecker Strasse 5, D-95509 Marktschorgast, Germany Phone: +49 9227 938 - 400, Fax: +49 9227 938 - 444 www.fan-separator.de Central stock: Kowaldstrasse 2, 8570 Voitsberg, Austria Subject to change / Press Screw Separator PPS / 12 2012 e

Open the catalog to page 6

Pressschnecken Separator PSS 1.2-780

Pressschnecken Separator PSS 1.2-780

Catalog excerpts

All FAN Separator GmbH catalogs and technical brochures