*myagriexpo

MiniMobil 32

Product catalog summary

Technical Specifications:
- Length with lifted draw bar: 122.0 cm
- Height: 105.0 cm
- Width: 80.0 cm
- Width of shield ring: 120.0 cm
- Rear wheel size: 480/400-8
- Front wheel size: 300-4
- Hose length: 50 m
- Hose diameter: 1” (internal measures)

Key Components and Functions:
- The machine includes a bevel gear, drive shaft of the rotor, and a clutch that transmits drive to the belt and pulley for hose pulling.
- The rear end features a drawbar for machine movement and a clutch lever for disconnecting and coupling.
- A tap for speed control can also function as a stop tap to halt the machine for irrigation.
- An automatic stop valve for propulsion is located on the left, along with a small ½” sprinkler for supplementary irrigation.
- The drawbar follows the hose layout, with a release clamp for end stop.

Manufacturer Information:
- Fasterholt Maskinfabrik A/S, DK-7330 Brande, Tel. +45 9718 8066
- Website: www.fasterholt.dk

Catalog excerpts

Fasterholt Maskinfabrik · Ejstrupvej 22 · Fasterholt DK-7330 Brande · Tel. +45 9718 8066 www.fasterholt.d

Open the catalog to page 1

1. Here is the bevel gear, the drive shaft of the rotor and the clutch, which transmits the drive to the belt and the pulley for pulling the hose. 2. At the rear end of the machine is the drawbar to pull out the machine and the clutch lever, which is used for disconnecting and coupling. 3. The tap for speed control can also be used as stop tap, if the machine should stand still and irrigate. 4. To the left is the automatic stop valve for propulsion. Also displayed is the small ½” sprinkler with tap to supplementary irrigation from the rotor. 5. The draw bar follows the hose as it is laid out....

Open the catalog to page 2

MiniMobil 32

MiniMobil 32

Catalog excerpts

All Fasterholt Maskinfabrik A/S catalogs and technical brochures