TACKLE THICKER MATERIAL n/ Fell trees up to 14” n/ Process brush, overgrwoth, and trees up to 6” n/ Ideal for applications where material dispersion is preferred n/ Compact driveline design allows for increased operator visibility VARIED MULCHING METHODS n/ Top-down feeding utilizes the bottom left side of the disc to mulch standing trees or come down on brush piles n/ Bottom-up feeding uses the right side of the disc to cut through the tree, lets the disc pull the three into the cutting chamber, and discharges material out the left side n/ Back dragging means the operator tilts the disc forward to engage material on the ground for cleanup n/ Felling employs the left side of the disc to cut through larger trees, then guides the tree with the push bar AN ADAPTABLE PLATFORM v/ Two push bar locations allow more or less disc engagement depending on application v/ Use standard teeth for maximum efficiency or switch to carbide teeth for applications where ground engagement is required Intake chutes • Brush — larger throat to gather material for high production • Hardwood — guides felled material into disc for improved processing Discharge chutes • Broadcasting — high efficiency and material dispersion • Processing — downward discharge to mitigate thrown debris and improve material sizing

DISC HAWK DRUM MULCHER Fell 14” trees and process 6” trees Long, stringy finished product AVERAGE CHIP SIZE Consistent, small chips Excels in rural applications MATERIAL DISPERSION Great for jobs with large, standing material STANDING PRODUCTIVITY Average efficiency with felled material FELLED PRODUCTIVITY Ideal for dense, urban applications Better for medium sized standing material Excels in areas with felled material Experience results in greater productivity Allows great manueverability Change teeth, adjust push bar, and chutes Customize rotor system, teeth, push bar, and more Generally a...