SOIL HOG
8Pages

{{requestButtons}}

Catalog excerpts

SOIL HOG - 1

Milling Milling Attachments

Open the catalog to page 1
SOIL HOG - 2

Fecon Milling Attachments achieve ideal results in land preparation for agriculture, forestry, and development. Eliminate multiple steps that are costly and time consuming to provide a finely milled blend of soil, and organics including stumps, roots, and slash. Go a step further by incorporating stabilizing or remediation materials when a homogeneous mix is crucial. A wide family of attachments are offered to provide the width, depth and power class to serve many applications on either PTO or Hydraulic carriers. The patented rotor system and carbide cutting tools reduce and blend soil,...

Open the catalog to page 2
SOIL HOG - 3

PTO Synchronization Z-Linkage and top link cylinder for synchronizing the pivoting PTO gear box of the attachment to the tractor. Standard on PTO model FMA8039, FMA8032 and FMA8028. Optional on RF700-650. Rotovator Tool The ideal geotmetry of the rotovator tool keeps you working through rock and abrasion. Rotor Direction Rotors can be installed to cut forward or reverse directions in relation to the tractor direction. Finer sizing and better mixing results when the rotor turns opposite the direction of tractor travel. Faster production results when the rotor turns with the direction of...

Open the catalog to page 3
SOIL HOG - 4

Milling FMA8039 Hydraulic Drive Model Hydraulic model FMA8039 milling heads are designed to operate on 300-600HP hydraulic powered track or wheeled machines commonly used in forestry or mulching applications. The head is mounted on the front of the tractor with the rotor cutting up or down towards the front. PTO Drive Model PTO model FMA8039 milling heads are designed to operate on PTO tractors from 200-440HP, and equipped with hydrostatic or creeper gear transmissions. In the standard configuration the head is set up to be pulled behind the tractor, with the rotor cutting down towards the...

Open the catalog to page 4
SOIL HOG - 5

Milling FMA8032 PTO Drive Model FMA8032 milling heads are designed to operate on PTO tractors from 180-300HP, and equipped with hydrostatic or creeper gear transmissions. In the standard configuration the head is set up to be pulled behind the tractor, with the rotor cutting down towards the attachment’s rear-mounted compacting roller. • Three-point-linkage with synchronized gearbox and Z linkage to protect the tractor drive line • Fixed position carbide tools with large carbide cutting tip and carbide abrasion plate on the body. Spring Tensioned Drive Slow Speed with spring tensioned belt...

Open the catalog to page 5
SOIL HOG - 6

Skid Steers Milling FMA8028 PTO Drive Model FMA8028 milling heads are designed to operate on PTO tractors from 140-190HP, and equipped with hydrostatic or creeper gear transmissions. In the standard configuration the head is set up to be pulled behind the tractor, with the rotor cutting down towards the attachment’s rearmounted compacting roller. • Three-point-linkage with synchronized gearbox and Z-linkage to protect the tractor drive line • Fixed position carbide tools with large carbide cutting tip and carbide abrasion plate on the body. Spring Tensioned Drive Slow Speed with spring...

Open the catalog to page 6
SOIL HOG - 7

Milling RF700-650 PTO Drive Model RF700-650 milling heads are designed to operate on PTO tractors from 100240HP, and equipped with hydrostatic or creeper gear transmissions. In the standard configuration the head is set up to be pulled behind the tractor, with the rotor cutting down towards the attachment’s rear-mounted compacting roller. • Three-point-linkage with synchronized gearbox and Z-linkage to protect the tractor drive line • Fixed position carbide tools with large carbide cutting tip and carbide abrasion plate on the body. Optional Compacting Roller Durable Rotor Carbide tipped...

Open the catalog to page 7
SOIL HOG - 8

Fecon Inc. offers many other forestry product lines: Fecon Tractors Drill Products: Forestry Attachments: Other Fecon Products: • Tree Shears • Stump Grinders • Deck Mowers • Soil Hogs • Grapples • Log Jaw Operators cab must be protected with both properly maintained 1/2” LEXAN® Glass (or equal) and Falling Object Protection. Always insure that your carrier manufacturers safety features (including Falling Object Protection, and Roll-Over Protection) meet your job safety requirements. Certain guarding and features may have been removed for illustrative purposes, always run with proper...

Open the catalog to page 8

All Fecon catalogs and technical brochures

  1. STUMPER

    1 Pages

  2. DISC HAWK

    2 Pages

  3. EX300S

    2 Pages

  4. GL300

    2 Pages

  5. EX55

    2 Pages

  6. GL14

    2 Pages

  7. BULL HOG

    10 Pages

  8. TREE SHEARS

    4 Pages

  9. STUMP HOG

    2 Pages

  10. final_ex60

    2 Pages

  11. ftx128l

    4 Pages