STUMP HOG

Product catalog summary

Introduction
This document provides technical specifications and operational guidelines for the Stump Hog series of forestry attachments, specifically models SH360, SH260, and SH400. These attachments are designed for efficient stump grinding and are compatible with various excavators and skid steers.

Safety and Operational Guidelines

Operators must ensure the cab is protected with 1/2” LEXAN® Glass or equivalent and Falling Object Protection.
Verify that carrier safety features meet job safety requirements, including Falling Object and Roll-Over Protection.
Always operate with proper guarding in place, as some features may be removed for illustrative purposes.
Safety is the responsibility of the operator, and specifications are subject to change without notice.

Model Specifications

SH360: Designed for 20-30 ton excavators with hydraulic flow of 40-55 gpm. Features include a 36” wheel diameter, 2600 lbs weight, and interchangeable with Fecon Mulcher.
SH400: Suitable for higher horsepower applications (170-350 hp) with a hydraulic flow of 65-140 gpm at 5500 psi. It has a 40” wheel diameter and weighs 4550 lbs.
SH260: Offers 15 tools with single bolt fastening and three tool choices for cost efficiency. It provides unlimited swing, reach, and depth for hard-to-reach stumps.

Technical Features

All models feature a polychain belt drive and bolt-on mount custom to excavators with pin-on or quick attach options.
SH400 includes a central pivot with tapered roller bearings and a 160cc axial piston drive motor offering approximately 500 rpm rotor speed.
Backfill blades are included for filling holes and leveling chips post-grinding.

General Specifications

Hydraulics horsepower ranges from 70-350 hp depending on the model.
Flow and PSI specifications vary, with SH360 offering 30-45 gpm at 3000-4750 psi and SH400 offering 65-140 gpm at 5500 psi.
Work zones and wheel diameters vary, with SH360 having a 70” work zone and SH400 an 84” work zone.

Catalog excerpts

Stump Grinders Stump Hog Forestry Attachments

Open the catalog to page 1

fecon.com [email protected] +1 513 696 4430 SH260 • Grind out entire root balls with 26" diameter grinding. • Sweep left to right. • Severe Duty frame, wheel and drive components. • Backfill blade for filling the hole and leveling chips. • Attaches to the universal skid steer mount. • Plug in the high flow lines, case drain and low flow lines on carriers that are equipped. • 12" Telescoping capability. • Easily tilt up and down with joystick controls. • Interchangeable with Fecon Mulcher. SH360 • Just 15 Tools with single bolt fastening. • Three tool choices for lower operating costs. • Unlimited...

Open the catalog to page 2

STUMP HOG

STUMP HOG

Catalog excerpts

All Fecon catalogs and technical brochures