RAMOS Disc mowers
60Pages

RAMOS Disc mowers Harvesting energy.

A worried glance at the sky. Black clouds are drawing in. The clock is ticking. It will be pouring in less than an hour. The pleasant, sunny days are gone. And the work is done. For the harvest is already saved.

We at FELLA understand: There’s a very small window for harvesting. And everything has to be just right, everything has to run like clockwork. No field is too large for our mowers, no meadow too undulating and no task to tough. Our wide range of machines allow us to play a part in these crucial days of the year. We’re proud of this. For your history is our history. Harvesting energy

RAMOS front-mounted mowers ► Perfect for operating in mower combinations ► Lateral movement for harvesting without losses ► Three-dimensional sensing of the ground contours ► Working width of 3.00 m RAMOS rear-mounted mowers ► Suitable for use with smaller tractors ► With or without inner skid ► Spring relief as standard ► Working widths of 1.66-3.18 m ► Efficient rear-mounted mowers with and without conditioner ► Very user friendly ► Perfect ground contour following thanks to the FELLA patent ► Working widths of 3.00-4.50 m

Optimum cutting results with robust construction and large working widths: The FELLA disc mowers represent cost-effectiveness, efficiency and the best results when harvesting forage. FELLA helps you achieve high-quality forage. Harvesting energy with FELLA. RAMOS mower combinations ► Low-lying conveyor belt with lateral movement and speed setting ► Full automation of work processes ► Working widths of 8.30 m and 9.30 m RAMOS trailed mowers ► Centrally pivoted drawbar ► User-friendly and flexible ► Working widths of 3.00 m and 3.50 m TAURUS conditioner for three-point attachment ► Convenient...

AN EXACT CUT EVEN UNDER DIFFICULT CONDITIONS Thanks to the extremely flat cutter bar with mower discs which run in pairs, a deeper, more uniform cut is possible. With elliptical discs and robust conveyor drums, it is possible to achieve a clean cutting pattern and good forage throughput even on difficult terrain. VERY LOW RISK OF WEAR The cutter bar is bolted in place and easy to repair, with all components mounted in the base plate and bolted cover plate. The standard stone guard and large, hardened skids extend the service life. LIGHTWEIGHT AND ROBUST The support frame is very lightweight...

RAMOS spur gear drive Low weight – highly efficient. FELLA mowers with a spur gear drive are impressive thanks to their lightweight design and ease of handling. They are simple to attach and, because the working position can be hydraulically switched over to the transport position from the tractor seat, they are ready for use extremely quickly. Working widths of more than 3.0 m can be achieved and yield can be maximised, even with smaller tractors. DRIVE PROTECTED Clamping/shear pins in the bearing flange of each mower disc protect the drive if an obstruction is encountered when driving....

RAMOS compact angular gear Low power demand – huge area output. FELLA mowers with compact angular gears are designed to provide maximum performance while remaining cost-effective in all regions and under all harvesting conditions. The design of the mower units features an impressive mix of stability and flexibility. They have particularly low power loss thanks to their special drive system, and they feature high ground coverage and a low power demand. PERFECT CUTTING PATTERN The large mower disc overcut is positioned well towards the front of the mower discs and provides an ideal cutting...

HIGHEST-QUALITY FORAGE The streamlined design with profiled base and hardened skids guarantees maximum forage quality. This enables the soil to be cleanly separated from the forage and to flow away under the cutter bar, even during field forage harvesting in poor conditions or on wetlands. The raw ash content in forage is reduced to a minimum and the sward is protected. MAXIMUM LONG-TERM PERFORMANCE The indirect drive, which uses a large-dimensioned hexagonal shaft and the robust angle drive, results in uniform power output across all mower discs and the smoothing of torque peaks. The...

TURNS THINGS AROUND IN EMERGENCIES. The patented FELLA driveGUARD® provides premium overload protection. It reliably protects the mower and the mower gearbox against damage in the case of foreign objects in the crop flow. The driveGUARD® overload disc is connected to the power train and the mower disc. If the mower disc is jammed by a foreign object, driveGUARD® shears off at defined breaking points. The connection is interrupted and the mower disc turns freely – as a result, no more forces act on the power train. This prevents damage. The key aspect here is that only the driveGUARD®...

SECURELY CONNECTED The mower disc itself is always screw-fitted with the outer ring of the profile flange. Loss of the mower disc is safely prevented. INTELLIGENT ATTACHMENT Because driveGUARD® is positioned outside the cutter bar, it is not necessary to open the cutter bar in order to carry out repairs and the oil supply is not contaminated. ˴˴ epairs can be carried out directly on the field in R minutes. ˴˴ nly the driveGUARD® disc needs to be replaced – O extremely cost-effective. Foreign object in crop flow Mower disc is jammed Overload element shears off – mower disc turns freely –...

Our technology highlights Make all the difference. FREE-FLOATING CUTTING. The TurboLift cutter bar suspension system from FELLA guarantees continual optimum contact pressure during the entire mowing process. Compact angle mowers with TurboLift function with a “floating cut”, protecting the sward and reducing forage contamination to a minimum. The innovative control device enables quick, easy and continuous adjustment of the contact pressure for a wide variety of operating conditions – even while driving. This provides an enormous advantage in terms of time and quality, particularly when...