SINGLE DRIVE AXLE AGRICULTURAL TIPPING TRAILER NSR TM - PM SERIES This agricultural trailer with drive axle is equipped with a three-way tipping and a rear tilting mechanism. It is especially designed to transport loose goods. Chassis: The chassis is made up of two U-section (UPN) longitudinal members, which are held together by 4 electro-welded U-section (UPN) crossmembers. Body: The platform is made of checker plate and is equipped with sideboards. The up- and downward-opening tailgate is supplied as standard equipment. The body’s robust structure is made up of two U-section (UPN) longitudinal members which are held together by U-section and rectangular hollow section stiffening crossmembers. Braking: mechanical or hydraulic depending on the type (see table below). Suspensions: stiff Painting: anti rust primer and two coats of synthetic paint. types Code Technically permissible load [kg.] Maximum authorised load (In italy) [kg.] Platform height from the ground {•} [m] {•} Platform height is measured with standard tires. (*) The technically permissible load can only be guaranteed when the trailers have the optional tires marked with (°) in the optional equipment table

optional equipment Optional equipment upon request Code Side panel extensions H=0.40 m for NSR 40 T/P - NSR 40 T/P M Side panel extensions H=0.50 m for NSR 50 T/P - NSR 50 T/P M Side panel extensions H=0.50 m for NSR 60 T/P - NSR 60 T/P M Side panel extensions H=0.60 m for NSR 70 T/P - NSR 80 T/P - NSR 70 T/P M Grain chute Additional charge for new 7.50-16 14 P.R. dual tires for types NSR 60 T/P M (°) Hydraulic braking (internal reference only) for NSR 40 T/P M Hydraulic braking (internal reference only) for NSR 50 T/P M Hydraulic braking (internal reference only) for NSR 60 T/P M Protection...