Auto-Lub AP NG
1 / 25Pages

Empresa certificada

PRESENTATION WARRANTY TECHNICAL DESCRIPTION 4- PREPARATION AND OPERATION 4.1- Auger Position 4.2- Level Regulator 4.3- Augers Blocker Tube of the Fertilizer 4.5- Installation of the NG Lid Outlet Spout Assembly 4.6- Installation of the NG Outlet Spout at the Main Body 5- REDUCTION FLOW SYSTEM (OPTIONAL) 5.1- Installation of Flow Reduction System 6- FIELD PRODUCERS 6.1- Humidity, Wet or Pasty 6.2- Maintenance Tube 6.3- Dosages and Measures Recommendations of the Fertilizer 6.4- Table of Measures in Grams of Fertilizer per 100 Linear Meters (In Motion) 8- MAINTENANCE OR EXCHANGE OF THE AUGER...

PRESENTATION Agromac Indústria e Comércio de Equipamentos Agrícolas was founded in 2002, in Passo Fundo-RS/Brazil, being created by aligning its efficient management an upward trajectory. Formed by a specialized and technical group focused on technological innovation, driven by the challenge of providing and boost agricultural mechanization in planting and fertilizing the soil, promotes and inspires actions and atitudes towards sustainable agriculture for this and future generations. Through the revolutionary system FertiSystem Auto-Lub AP NG®, precision doser for fertilizer attachable to...

WARRANTY The guarantee of the FertiSystem® is assured only for the purchaser industry for a period of one (1) year form the date of acquisition after the emission of the purchase bill the Agromac company, against manufacture or material defects that could cause the operational compromising of the product. 1. Conditions: A) The product is guaranteed against any defects of material or manufacture, since the proved that the parts and components have been supplied by the Agromac Indústria e Comércio de Equipamentos Agrícolas; B) The parts and components will be replaced if the defects are...

TECHNICAL DESCRIPTION The principle of operation of the FertiSystem provides the regularity in the distribution of solid fertilizer along the plantation line. The fertilizer is conducted by the Auto-Cleaning Auger to the zone of impoundment, then, it overflows in uniform and homogeneous volumetric amounts across the level regulator to the outlet spout and from this to the ground. The impoundment zone performs the function of removing pulse variations caused by the cycle of the Auger. The precise and uniform distribution favors the absorption of nutrients by the plants in the correct amounts,...

1 - BASIC DIMENSIONS In milímeters

MAIN BODY - Main sustention element of all the components. Manufactured with resistant and long durability material. BEARING WITH DOUBLE CLOSING - Supported on ball bearings lubricated with special grease totally protected and closed, providing low torque of tractioning to the set, besides resulting in high useful life. BEARING SUPPORT – Rotational movement of the axle (supported on two lubricated ball bearings) generated by the run of the planter, hydraulic, electric or other propulsive sources. AUTO-CLEANING DISCHARGE HOLE - Eliminates contaminations, avoiding the contact with the...

MAINTENANCE TUBE - Helps replacement or 1 change of the Auger with no need of removing the fertilizer from the reservoir. FIXER TUBE – Helps in the operation of changing 2 or replacing the Auger and on the removal and fastening of it. BLOCKER TUBE – Blocks the flow of fertilizer when it is necessary to isolate crop rows. Ex.: multiple seeders. REDUCTIVE CAMERA - Reduces the volume of fertilizer, with efficient and effective application, ensuring precision en planting at low dosages. It meets the requirements of precision agriculture. It should be used only with the RF Auger. RF AUGER – It is...

4 - PREPARATION AND OPERATION 4.1 Auger Position: The Auger must be well supported at the internal bottom of the Linin, using the Fixer Tube (A) as shown in Fig. 01, pushing the Lock Ring (B). If the Auger is not positioned on the right way, you can change and interfere with the dosage of the fertilizer can damage the level regulator, it can interfere and alter the fertilizer dosage. If it is dirty of fertilizer, it is necessary to clean the Lining so that does not remain fertilizer between the bushing of the Auger, O’Ring, Square Hole Stainless Steel and the bottom of the Lining (Fig. 02)....

ATTENTION!!! All dosages information expressed in this manual may be changed due to the physical and chemical properties of fertilizers. 4.3 Augers: 2”* Auger *Nominal Dimensions. For the Auger’s choice, according to the needed dosage, take it as the basis of the machine manufacturer's table information. Remember that the amplitude of dosage of each Auger may vary due to the chemical and physical properties of each fertilizer. For dosages above 200 kg/ha it is recommended the use of the 2" Auger. 4.4 Blocker Tube of the Fertilizer: If there is the need of isolating some planting lines and...

4.6 Installation of the NG Outlet Spout at the Main Body To perform the installation of the NG Outlet Spout Assembly (A) Fig. 08, approach it to the NG Main Body (B), making sure that the fencing (C) stays superimposed to the point "X" of the NG Main Body (B). To facilitate the fitting, slightly tilt the NG Outlet Spout Assembly (A) Fig. 09 and target the fittings (D), on both sides, aligning them and fixing them until the end. After this, lock with the Stainless Steel Lock (E), Fig. 10, turning until the locking end on both sides. Note the final position of the Sealing (C). Intermediary...

5 - FLOW REDUCTION SYSTEM (Optional) Reductive Camera Lock Ring *Nominal measure. The RF System (Flow Reduction) is optional and can be used in special circumstances and under expert technical guidance. The Reducer Flow Kit does not need adaptations or modifications to the FertiSystem Doser Set, just the assembling of Reductive Camera, the RF Auger and the Lock Ring. 5.1 Installation of Flow Reduction System: The Flow Reduction System (RF) aims to reduce the amount of fertilizer to be applied, and consequently, reduction in cost of crop fertilization. Enables more alternatives in the range...