• Simple connection to tractor battery.
• Includes implement switch input and speed sensor input.
• Partial hectare counter function available.
• User-friendly setup via smartphone or tablet.

The Kit FS Controller TXF W1 is a wireless controllable hopper motor kit designed for agricultural use. It includes a durable brushless motor and an easy-to-install cable harness, suitable for driving seed or fertilizer hoppers. Parameters can be set using a smartphone or tablet.

Application examples include:

• Seed distributor actuation in air-drills or small grain planters.
• Microgranular spreaders in spuds.
• Salt, fertilizer, and grain spreaders.
• Transplanting machines.

• Inputs and communication are facilitated through a 3 pole DIN 9680 plug, with other options available upon request.
• Speed sensor input: 3 pin (8V – 80mA supply, GND, signal).
• Implement switch input: 3 pin sensor input (8V – 80mA supply, GND, signal).
• WiFi module (Access Point): Settings and functions accessible via WiFi connection through any browser (iOS, Android, Windows).

• Nominal Torque at output shaft: 8.75Nm.
• Peak Torque at output shaft: 19Nm (single pulse, 500ms duration), 12Nm (repetitive, 500ms duration every 5 seconds).
• Nominal Speed at output shaft: 100 rpm.

• Operational Temperature: -10°C to +60°C (full specs), -10°C to +70°C (derated).
• Storage Temperature: -40°C to +105°C.
• IP grade: IP6K5 / IPX9K according to ISO-20653.
• Vibration and shock tests conform to IEC standards.

• EMC compliance with EN ISO 14982: 2000 standard for agricultural and forestry machinery.
• Supply voltage: 11-16V (consider voltage drop due to cable harness).
• Supply current: 19 A under nominal torque and speed conditions at minimum supply voltage.