E TECHNIK für jede JAHRESZEIT PRODUCT CATALOGUE I N N O VAT I V E T E C H N O L O G Y for each S E A S O N

MULTIMATIC CONTROL FMC The FIEDLER ® Multimatic Control FMC with proportional joystick and 3D-mouse is a future-oriented control and information panel, with which all FIEDLER ® attachment devices and superstructures can be operated. It works completely on the CAN bus basis and enables data to be collected and remote maintenance. The control panel automatically detects the attachment and starts the necessary software for the user interface. automatic device detection  For all attachments the same control panel with  Showing the position of the vehicle  Record of all work carried out  Registration...

MOWING TECHNOLOGY & WORK TOOLS FRONT BOOM FFA The front boom series FFA models are available with a reach of 3m to 7m from the middle of the vehicle to outer edge of mower head. All front booms can be equipped according to the carrier vehicle, with and without its own oil supply. A wide variety of attaching plates and Hydraulic options are possible. A quick-change system enables step-less rotation and changing of the working tool within a few minutes.  The Fiedler rapid change system enables the attachment of more than 18 different working tools  Boom series from 3m to 7m extension range ...

MOWING TECHNOLOGY & WORK TOOLS MOWING TECHNOLOGY & WORK TOOLS  More than 18 professional working tools for maintenance and cleaning work  One person operation of all working tools  All tools can be used on the right or left of the vehicle There are a large number of attachments for the FFA front boom series, which make the maintenance work much easier and allow them to be carried out in a short time. The quick-change system enables the changing of equipment in a few minutes by only one operator. The stepless variable rotatability by 360° in the quick-change system allows the attachments to...

MOWING TECHNOLOGY & WORK TOOLS MOWING TECHNOLOGY & WORK TOOLS  Work equipment with high cutting performance  The work equipment has been developed for professional use  All work equipment is GS tested All working tools are interchangeable with each other by the standardised quick-change system for all FFA series. Depending on the size of the front boom, there is the appropriate working tool. With the multiplicity of working tools, the front booms become the professional helpers in cleaning and maintenance work. SA – Laterally driven | MA – Centrally driven | AS – Aspiration

WATER AND WATERING TECHNOLOGY WATERING ARM FGA The FGA 500 | 700 | 1000 | 1200 series are all equipped with electric drive and proportional CAN bus control. All transmission components, main and auxiliary brackets, and pipes are manufactured in stainless steel. An innovative swiveling movement guarantees a swivelling range of 240° in front of the vehicle. By means of a parking device with wheels, the watering arm can be installed and dismantled by only one person. The watering arms can also be controlled hydraulically directly by the vehicle or via a hydraulic block. The insulation of the pipelines...

WATER AND WATERING TECHNOLOGY WATER AND WATERING TECHNOLOGY  There is the right watering arm size for every vehicle  Can be attached to all vehicles thanks to the electric drive (pick-up, transporter, small tractor...)  Attachment and dismantling with just one person  The watering arm was developed by professionals for professionals A collision guard under the watering arm protects the device from damage during work. The innovative electronics ensure that the vehicle battery is not discharged during the work. The kinematics of the watering arm can be used to bring it to the right/left or...

WATER AND WATERING TECHNOLOGY By developing innovative tanks in cascade construction, the optimum tank volume in width and height can be produced for each vehicle. From 230l to 17600l, the tank systems (in the required colour variants) are equipped with a wide variety of pumps for irrigation, watering, flushing, high pressure cleaning or for applying brine.  The tank system can be mounted optimally on each vehicle type  Charge protection according to VDI 2700  Thanks to the modular system, all requirements regarding reels, pumps and tank volume can be optimally customised

WATER AND WATERING TECHNOLOGY The high-quality polyethylene tanks are manufactured in four fixed height dimensions, but in different widths, depending on the vehicle type. The tank systems are UV-resistant, can be used from -40°C to +60°C and are released for drinking water transport.

WATER AND WATERING TECHNOLOGY FLUSHING BAR FSB The series of flushing bars can be mounted on the smallest centre-pivot steering vehicles up to the largest trucks. The flushing bars are always optimally designed for the required flow rates and water pressures. The flushing bars are designed to be telescoping. In addition, they can be equipped with controllable frog-mouth nozzles, jet nozzles and sections that can be switched on and off. The mounting system makes it possible to install additional pumps, hose reels, etc.

WATER AND WATERING TECHNOLOGY SCRUBBING DECK FSD The Fiedler Scrubbing Deck FSD1400 was specially designed for use on large flat surfaces and car parks. On a working width of 1.40m, extreme soiling can also be easily removed by using different disk brushes and cleaning chemicals. The three brush plates are arranged in a triangular shape to make it easier to get into corners and around columns during cleaning. The installation and dismantling takes place with a mobile parking trolley.  Short front part dimensions  All-round collision protection made of PE  optional suction bar  Brush plate...

WATER AND WATERING TECHNOLOGY TUNNEL WASHING SYSTEM FTWB The tunnel washing systems can be mounted on equipment carriers or trucks. The tunnel radius is detected via sensors and the set distance to the tunnel wall is automatically kept. In addition, by means of an inclination sensor, the washing brush recognises whether the wall, footpath or lamps are to be cleaned. The washing brush is used for cleaning signs and wall surfaces. Optionally, the systems can be equipped with medium-pressure or high-pressure hand lances in order to clean various objects.