Mechanical throttle pedal Throttle pedal 1200 is a series of general purpose pedals for wall mounting applications Made of nylon reinforced with 20% fibreglass, pedal 1200 is very robust and reliable, therefore it can be mounted also on heavy duty construction machines or military vehicles. Environmental contamination is minimised due to the joint combination of the gasket with the mounting flange which segregate the cabin from the engine area. The full sealing between the cabin and the engine area is widely appreciated in the military sector where the vehicles are specified to travel with the cabin up to one meter below the water level. Stroke and pedal angles are adjustable via a micrometric screw. Link to the pull cable for the throttle engine is on the lower part of the pedal. Link to the hand throttle control is on the upper side of the pedal. MECHANICAL SPECIFICATION • Operational life (at 25 °C) • Operating temperature • Storing temperature • Weight • Travel angle (standard)

1200 MECHANICAL THROTTLE PEDAL > 2 di 2 PHYSICAL DIMENSIONS AND MOUNTING HOLES 65 Link to the hand throttle control Wall Sealing (non supplied) (*) Window on the wall to insert the throttle pedal before the fixing Link to the throttle engine Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP