1240
4Pages

Electronic throttle pedal General purpose throttle pedal This series of pedals is mainly intended for tractors and agricultural equipment but, due to its versatile mounting features, it can be mounted on several kind of vehicles. A double concentric torsion spring is incorporated for idle position return. Made in Nylon 6.1 plus GF, pedal 1240 is very robust and reliable. It is easy to customize and has a high mounting flexibility: Floor mounting Wall mounting Side mounting Under floor mounting All “built in design” includes springs and electronic card. It is available with different IP protection degrees (from 00 to 69K). In line with automotive throttle pedal design, sensors are fully integrated into the housing. Redundant system for “extreme” uses (e.g.: 4 channels output for mining applications). Measuring position is through Hall effect sensor and up to 4 channels can be provided. It is available with any kind of electrical interface: voltage with or without idle validation switch, PWM, current, CANBus. Upon request, pedal 1240 can be configured with the desired electrical cable length, number of poles, type of connector.

1240 ELECTRONIC THROTTLE PEDAL > 2 di 4 INSTALLATION EXAMPLES Under floor mounting Floor mounting Side mounting Wall mounting FLEXBALL I T A L I A N A WR CONTROLS GROUP

1240 ELECTRONIC THROTTLE PEDAL > 3 di 4 PHYSICAL DIMENSIONS AND MOUNTING INSTRUCTIONS PEDAL DIMENSION 67 92 = FIXING BRACKET The fixing bracket is necessary in case of wall mounting, floor mounting and under the floor mounting. It is not necesary in case of side mounting. 67 51 FLEXBALL I T A L I A N A WR CONTROLS GROUP

1240 ELECTRONIC THROTTLE PEDAL > 4 di 4 LIST CODE OF MOST COMMON ELECTRONIC PEDALS AND LEVERS MECHANICAL SPECIFICATION • Operational life (at 25 °C) • Operating temperature • Storing temperature • Weight (without arm) • Return spring • Hysteresis • Travel angle ELECTRICAL SPECIFICATION (VERSION WITH VOLTAGE SIGNALS) • Sensor • Power supply • Electrical signal • Resolution • and update rate in case • Correlation of 2 signals –40 .. +80 °C –40 .. +110 °C 0.80 kg Double safety spring 0.15% on read value 22 degrees Hall effect 5 Vdc ±10% ratio metric Galvanically insulated 10 bit, update rate...