2500
1 / 6Pages

Mechanical joystick This series of joystick, aluminium made, is available in a very high number of versions which can fulfil any designer’s requirements It can be equipped in combination with a great number of handles with a variety of switches and push buttons. Thanks to its construction based on long axles which slide into the two chambers of its aluminium body, movements are very precise and without friction, even in case of very heavy loads. The self centring springs return the lever’s stick always to central position, as soon as the stick is released; this gives the operator the feeling that everything is always under control and at the right place. Joystick 2500 with bent lever and standard handle Joystick 2500 with ergonomic handle Joystick 2500 with straight lever and standard handle Joystick series 2500 can be fixed either on a wall or on a bracket and it is equipped with a red lock lever for an easy identification. The connection of the cable on the joystick is very easy and safe; this operation can be done also when the joystick is already fixed on the machine. Joystick 2500 with multifunctional handle FLEXBALL I T A L I A N A WR CONTROLS GROU

+/– 13 mm • Stroke: load: 400 N • Working ratio: depend on the stick length and type • Lever return to centre • Automatic Locking lever • Colour: black at centre • CORRELATION BETWEEN LEVER’S AND CABLE’S MOVEMENTS Moving the lever, you operate the internal slides which move the cables and consequently the hydraulic distributor. With reference to the below picture n. 1, when you move the lever right, cable B pulls and when you move the lever left, cable B pushes. In picture n. 2, when you move lever left, cable A pulls and when you move lever right, cable A pushes. Picture 3 exemplifies the...

JOYSTICK 2500 WITH STRAIGHT LEVER AND STANDARD HANDLE Lever length Lever ratio Lock lever FLEXBALL I T A L I A N A WR CONTROLS GROUP

JOYSTICK 2500 WITH BENT LEVER AND STANDARD HANDLE It follows the dimensions of the standard lever. Upon customer’s request, lever’s length and bending angles can be modified. Lever ratio Lever length JOYSTICK 2500 WITH ANATOMIC HANDLE WITH 1 SWITCH Lever ratio Lever length Standard lever length is 320 mm but it can be customized to different lengths. It is also available in the bent version.

JOYSTICK 2500 WITH MULTIFUNCTIONAL HANDLE Standard lever length is 320 mm but it can be customized to different lengths. It is also available in the bent version. For detailed information on the possible configuration of the handle with its several switches, go to page 96 of “Industrial Products” catalogue. Lever length Lever ratio JOYSTICK 2500 WITH ERGONOMIC HANDLE AND A HIGH VARIETY OF SWITCHES Lever length Lever ratio Code basic version * This joystick version has a big handle which reduces the operator’s fatigue during long working period. It can be configured with up to 5 push...

PUSH-PULL CABLES WHICH FIT WITH LEVER 2500 LEVER SIDE end fittings are • The represented with the cable Cable type 07E, code 0076200*mmmmm Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 info@flexballitaliana.com www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP HYDRAULIC DISTRIBUTOR SIDE