2800
1 / 4Pages

Catalog excerpts

Mechanical joystick This series of economic joysticks is suitable for agricultural application such as front loaders or counter clockwise with respect to cable movements. It is available with maximum 3 push buttons. Lock lever Thanks to its modular construction, it can be configured for any application’s requirements like, for example, clockwise length: either 295 or 345 mm • Lever Cable stroke: +/– 16 mm • Lever ratio on lever’s length): either 6:1 or 7.5:1 • Lever stroke(depending measured on the knob (depending on lever’s length): either 200 mm (46°) or 250 mm (46°) •

Open the catalog to page 1

LOCK LEVER POSITION It is possible to mount the lock lever on each of the 4 sides of the base of the joystick 2800. Depending on the fulcrum position are defined two different correlations between the movements of the lever and the movements of the push-pull cable: clockwise or counter clockwise. Push-pull cable 2 Fulcrum PUSH PULL CABLES MOVEMENTS WITH RESPECT TO LEVER’S DIRECTION The following table describes the direction of the cables with respect to the movement of the lever. Lever’s direction Counter clockwise Joystick 2800 is delivered from the factory with the lock lever in closed...

Open the catalog to page 2

HANDLE AND PUSH BUTTONS The handle of joystick 2800 can be without or with up to 3 push buttons. Each switch can commutate a maximum current of 5 amps DC. In case of push buttons, the joystick is provided with a 4 poles electrical cable of a standard length of one meter. Electrical wiring Push button Wiring colur Common wire CODES Lever length Counter clockwise Counter clockwise Number of push buttons Joystick without handle Joystick without handle Joystick without handle Joystick without handle FLEXBALL I T A L I A N A WR CONTROLS GROUP

Open the catalog to page 3

PUSH-PULL CABLES WHICH FIT WITH JOYSTICK 2800 LEVER SIDE end fittings are • The represented with the cable Cable type E3, code 00341100-mmmmm 30 code 00741100*mmmmm Cable type 07E, Cable type 017, code 16 01041100-mmmmm 82 Cable type 017, code 0175940-mmmmm Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 info@flexballitaliana.com www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP HYDRAULIC DISTRIBUTOR SIDE Cable type E3, code 0035730-mmmmm

Open the catalog to page 4