Electronic control lever This series of electronic control levers is suitable for a variety of applications, including industrial vehicles, agricultural machines, heavy duty and any other kind of special machines The die cast lever is simple, very robust and thanks to the non-contact sensor technology, it can operate in harsh environments in continuous operation with high reliability and long working life. It can be mounted either in the cabin or in open air. The sensor-less technology guarantees a longer life time, if compared with a lever with potentiometer. Thanks to its different versions, 1 or 2 channels, with or without idle validation switch, PWM, current and CANBus, this lever can interface with almost all electronic motors. Upon request lever 600 can be equipped with company logo. Electrical cable can also be configured in the desired length, number of poles, type of connector. FLEXBALL I T A L I A N A WR CONTROLS GROUP

600 ELECTRONIC CONTROL LEVER > 2 di 2 ELECTRICAL SPECIFICATION (VERSION WITH VOLTAGE SIGNALS) MECHANICAL SPECIFICATION • • Operating temperature • Storing temperature • Weight • Rotation • Mechanical friction • Travel angle • Sensor • Electrical signal • Kind of signal • Linearity • Accuracy • Power supply • Current consumption • Minimum load resistance • Maximum load capacitance –40 .. +90 °C –40 .. +110 °C 0.50 kg On bushes Adjustable 80 degrees Hall effect Voltage output galvanically separated Ratiometric 2% 2% 5 V ±10% <10 mA (per each channel) 4.7 Kω 10 nF ELECTRONIC LEVER WITH 2 VOLTAGE...