Mechanical control lever ETC are robust and versatile levers which can combine multi functions for: control • throttle of hydrostatic pump • command gear shifter • speed inversion • ETC is available in dozens of customizations, such as: single or double configuration, with or without friction. ETC can be plane or swinging. Its lever’s movement is guided through a slot, whose paths is specific per each application. More than 25 mask paths are available as standard, furthermore the path can be designed according on specific customer’s request.

ETC MECHANICAL CONTROL LEVER > 2 di 8 maximum bending angle: 45° • Lever’s working force (on the cable): 1500 N • Nominal ratio: 8:1 • Gear Fixing lengths (standard): 200, 252 and 310 mm • Cablesbracket can be mounted on this lever: V6, V7, V8, 07, Flexball 70, Flexball 95 • Lengthswhich of the lever (standard): 148 or 180 mm •

ETC MECHANICAL CONTROL LEVER > 3 di 8 MASK’S PATH AND OTHER OPTIONS The masks here below schematize different application cases and configurations. ETC with swinging lever configured for gear shifter application ETC with swinging lever configured for an hydrostatic pump application with speed direction inversion ETC with plane lever configured for an hydrostatic pump application with speed direction inversion and neutral detent ETC with plane lever configured to command the throttle The first swinging lever commands the hydrostatic pump and the second plane lever commands the throttle The first...

ETC MECHANICAL CONTROL LEVER > 4 di 8 POSITION OF FIXING CABLE BRACKET Thanks to a different setting of the fixing cable bracket, it is possible to determine different mounting positions and different push-pull cable exits with respect to the lever (vertical, horizontal and 45 degrees). It follows here below the possible combinations. FLEXBALL I T A L I A N A WR CONTROLS GROU

ETC MECHANICAL CONTROL LEVER > 5 di 8 CODES FOR ETC SINGLE FUNCTION WITH PLANE LEVER WITHOUT FRICTION Length of lever Position of fixing cable bracket Length of fixing cable bracket Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable “X” (which varies from 1 ot 6) identifies the position of fixing cable bracket. Please refer to “Position of fixing cable bracket” at page 64 of “Industrial...

ETC MECHANICAL CONTROL LEVER > 6 di 8 CODES FOR ETC SINGLE FUNCTION WITH SWINGING LEVER WITHOUT FRICTION Length of lever Position of fixing cable bracket Length of fixing cable bracket Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable Flexball cable Wire cable “X” (which varies from 1 ot 6) identifies the position of fixing cable bracket. Please refer to “Position of fixing cable bracket” at page 64 of “Industrial...

ETC MECHANICAL CONTROL LEVER > 7 di 8 CODES FOR ETC DOUBLE FUNCTION First lever Second lever “Z” is a two digit number (from 01 to 13) which identifies possible configuration of the ETC CABLES WHICH FIT WITH LEVER ETC push-pull cables and Flexball cables can be connected to lever ETC • Both The connection • catalogue) between the lever ETC and the cable is always through an eyebolt (see page 24 of “Industrial Products” • Cable’s engine side can be configured with any shape as shown at page 16 of “Industrial Products” catalogue

ETC MECHANICAL CONTROL LEVER > 8 di 8 Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP