- Catalogs
- Fluence Bioengineering
- SPYDRx PLUS
SPYDRx PLUS
1 / 1 PageView full catalog
SPYDRx PLUS
Product catalog summary
Room Specifications:
The room measures 28' x 58' and is an indoor facility equipped with ten static tables, each measuring 4' x 20'. The aisles are 2' wide, with a 4' egress at the entrance and exit, totaling 800 square feet of canopy space.
The room measures 28' x 58' and is an indoor facility equipped with ten static tables, each measuring 4' x 20'. The aisles are 2' wide, with a 4' egress at the entrance and exit, totaling 800 square feet of canopy space.
PPFD Measurements:
PPFD (Photosynthetic Photon Flux Density) values are provided in µmol/m2/s. The average PPFD is 909 µmol/m2/s, with a maximum of 1022 µmol/m2/s and a minimum of 664 µmol/m2/s.
PPFD (Photosynthetic Photon Flux Density) values are provided in µmol/m2/s. The average PPFD is 909 µmol/m2/s, with a maximum of 1022 µmol/m2/s and a minimum of 664 µmol/m2/s.
Measurement Density:
Measurements were taken at the center point of every 6'' square segment, based on a recommended mounting height of 6'' above the canopy. A total of 234,552 measurements were compiled, with 2,400 measurements for every 4' x 4' canopy.
Measurements were taken at the center point of every 6'' square segment, based on a recommended mounting height of 6'' above the canopy. A total of 234,552 measurements were compiled, with 2,400 measurements for every 4' x 4' canopy.
Fixture Count:
There is one SPYDRx PLUS fixture per 4' x 4' canopy, with a total of 50 fixtures used in the facility.
There is one SPYDRx PLUS fixture per 4' x 4' canopy, with a total of 50 fixtures used in the facility.
See more
Catalog excerpts
PHOTOSYNTHETIC PHOTON FLUX DENSITY (PPFD) MAP SPYDRx PLUS 28’x58’ indoor facility with ten static tables measuring 4’x20’. Aisles are 2’ wide, with 4‘ egress at entrance and exit of room totalling 800 square feet of canopy. Measurement density Measurements taken at center point of every 6’’ square segment. Model based on recommended mounting height of 6” above canopy. A total of 234,552 measurements were compiled (2,400 for every 4’x4’ canopy). Total fixture count
Open the catalog to page 1All Fluence Bioengineering catalogs and technical brochures
VYPR 2x2 Pages
VYPR 2p2 Pages
RAZRx2 Pages
RAZR Array2 Pages
SPYDR 2x2 Pages
SPYDRx PLUS2 Pages
SPYDRx2 Pages
SPYDR 2i2 Pages
SPYDR 2p2 Pages
Dimmer User Manual12 Pages
RAZRx Series User Guide10 Pages
RAY Series2 Pages
VYPRx PLUS1 Page
VYPRx1 Page
SPYDRx1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.