RAMBO SERIE multi-purpose work vehicle TECHNICAL SPECIFICATIONS DRIVER POSITION GEARBOX BODY PAYLOAD CHASSIS SUSPENSION POWER TAKE-OFF ELECTRICAL SYSTEM SPEED STANDARD EQUIPMENT grip of the 4 driven wheels on any type of terrain. Front: MacPherson independent suspension with coil springs and shock-absorbers with top mounting equipped with ball bearing. Rear: with leaf-springs and double-acting shock absorbers. Predisposed, variable-speed central coupling (on transfer case). 40.0 km/h. Spare wheel, tow bar (non-type approved), rear light guards, wash/wipe kit, combination light switch, jack with wrench, user accessories, use and maintenance manual, colour: red. Left-hand drive. 10 forward + 2 reverse speeds (5+1 low range, 5+1 high range) with independent disengagement of the front-wheel drive (in both low and high range). Servo-assisted hydraulic brakes, with dual-circuit pump, rear drums and front discs. Mechanical parking brake on rear axle. 195R14C. (Optional remoulded 195/70 R15C off-road tyres, not covered by warranty). Type-approved 2 seats, sound-insulated with tempered glass, 2 windscreen wipers, storage compartment under tilting bench seat, interior heating (not available with air-cooled engines), seat-belts, wind-down windows, type-approved crush protection roll-bar. 2200 x 1500 x 300 mm with headboard (behind cab). 1500 kg (2900 kg gross vehicle weight rating).

RAMBO SERIE multi-purpose work vehicle VERSIONS PART NUMBER Lombardini 9LD625/2 twin-cylinder, 4-stroke, air-cooled diesel. Rated power 26.0 HP (18.8 kW) @ 3000 rpm. Displacement 1248 cc, peak torque 67 Nm @ 2000 rpm. Lombardini LDW 1404 (97/68/EC Step III A Approved), 4-cylinder, 4-stroke, water-cooled diesel with axial fan. Rated power 35.0 HP (25.5 kW) @ 3600 rpm, displacement 1371 cc, peak torque 78 Nm @ 2200 rpm. DESCRIPTION Electro-hydraulic rear tipping with 2 pistons Electro-hydraulic three-way tipping with 2 pistons (only for version without central joint) PTO unit with disengagement,...