Infratec 1241 Grain Analyser for grain and flour The Infratec™ 1241 is a whole grain analyser using near-infared transmittance technology to test multiple parameters (moisture, protein, oil, starch etc) in a broad range of grain and oilseed commodities. Rapid, reliable and easy to use, it is the official system used for payment by bulk grain handlers around the world and has a number of approvals for trade purposes. Renowned instrument performance coupled with a unique calibration based a vast amount of data make it a highly versatile and powerful analysis unit. There are optional modules for flour analysis, test weight and flexible sample handling. Grains, oilseeds and beans and pulses – they can all be tested quickly, easily and accurately for payment and segregation. Most grains or oilseeds can be analysed directly without any grinding or sample preparation Moisture, protein, oil, test weight and many more Dedicated Analytical Solution

Unrivalled accuracy and simplicity for any type of business Fast and Flexible Virtually anyone can make accurate measurements with Infratec™ 1241. Pour the sample into the hopper, press the analyse key and read the result in less than a minute. It is easy to switch between small and large kernels, for example, from rapeseed to barley. Infratec is self-adjusting according to the selected commodity type. The principle behind the Infratec is that it should be simple for any business to take advantage of rapid reliable NIT analysis – a goal achieved with the ready-to-use ANN calibrations, simplicity...

Expand capabilities with additional modules Infratec networks have been recognised by both commercial and governmental authorities from the introduction of the first network in 1991, and today more than 7000 Infratec instruments are linked in global networks. The Infratec™ 1241 is part of a modular system that includes a Flour module, a Test Weight module and a Sample Transport module to test small samples, wet samples and liquids. Long term instrument and calibration stability Officially approved Infratec™ gives accurate results over many years of use. Infratec™ is officially approved and established...

Technology The power of Infratec™ 1241 NIT Near Infrared measurements of grain have shown superior performance when measuring in transmittance mode instead of reflectance mode. Transmittance mode measurements are made in a lower wavelength range, 570 – 1050 nm, whereas the primary information for reflectance measurements is obtained between 1100 – 2500 nm. The higher energy level of the light in the lower range allows for deeper penetration into the kernels, so not only the surface but also the inner part of the kernel is measured. All of this allows a larger sample volume when transmittance...

Stabilising technique Optional modules Regardless of conditions you can plug the Infratec 1241 unit in, turn it on and after a short selftest you’ll be producing accurate results. The accuracy is unaffected by sample and ambient temperature changes. Thank’s to a stabilising technique, that was patented by FOSS, you get correct results under all conditions. • Test Weight Module for measurement of volume weight • Sample Transport Module for liquids, moist samples and small sample volumes • Flour Module for measuring on flour, semolina, soymeal and other ground samples The Test Weight Module allows...

MOSAIC remote Software The Infratec 1241 Grain Analyser can be used as a stand-alone or as a networked unit via MOSAIC software. Transfer of data between instrument and LIMS systems as well as remote control of the unit is facilitated by Datalogger and Datalink software packages. MOSAIC is the latest in intelligent remote support. The MOSAIC concept is based on centralised configuration, support and surveillance. All you need to do is run your samples and leave the rest to FOSS or your own central team of specialists. Completely independent Mosaic networks can also be set up and managed by customers...

NEW: Extended warranty on new instruments with a FossCare agreement Secure your investment with a FossCare™ Support Agreement Let FOSS take care of you for a maximum return on your analytical investment. Get a four year warranty as part of the new FossCare Premium Preventive Maintenance Agreement or two years as part of any other FossCare agreement. In addition to the peace of mind afforded by the warranty period, the continual preventive maintenance pays off by keeping your analytical instruments working perfectly every day, year after year. Why preventive maintenance? As with any analytical...

Specifications Feature Rated current: Scanning monochrometer Wavelength range Optical bandwidth Number of data points/scan: Light source: Tungsten halogen lamp Storage Media: Flash disk, USB memory stick Sample handling and result presentation Analysis time: Path length: Variable cell automatically controlled from 6 - 33 mm Result report: Presented on the display as default. Can be sent to PC/LIMS and the printer port Outlier function: Warnings and options for the presentation of the result Menu driven Regression programs: ANN (Artificial Neural Network); PLS (Partial Least Squares) Operation...

Optional Modules • Flour Module • Test Weight Module • Sample Transport Module Printer: 25 pin parallel port Modem: 9 pin serial port External PC: 9 pin serial port LAN: RJ45 Keyboard/Barcode: PS/2 USB Ports: 2 pcs Remote I/O: 15-pin High Density DSUB Diagnostics: Self tests for internal communication, monochromator and detector (offset, gain and noise) System protection: Dust and humidity protected Support Software • Infratec™ File Tool, 1241 • WinISI™ 4, Calibration Development Software • Infratec Scan Predictor • Infratec DataLogger (included with instrument) • FOSS DataLink • MOSAIC internet...