OXYGENATOR OXYFLOW  ® 2P OXYFLOW ® 2P is an oxygenator designed for aquaculture. This device has a very high capacity of dissolution of oxygen into the water. CHARACTERISTICS TREATED WATER FLOWS Fresh water From 20 to 375 l/s Sea water From 10 to 215 l/s Each OXYFLOW ® 2P is manufactured according to a specific working pressure, for use in fresh water or sea water. The higher the working pressure is, the higher the outlet oxygen concentration is. The higher the water flow is, the larger the diameter and the greater the height of the OXYFLOW ® 2P are. A complete range of OXYFLOW ® 2P allows to answer all the needs. OXYFLOW ® 2P is installed at the discharge of 2 or 3 pumps. It can work with 2 pumps (66% of the nominal water flow) or 3 pumps (100% of the nominal water flow). It is generally used with 2 pumps, treating 2/3 of the water flow, the 3rd pump being kept in stock. Example of OXYFLOW ® 2P installed in a fish farm: DIMENSIONS Height From 2650 to 3650 mm Diameter From 520 to 2210 mm FABRICATION In Glass Reinforced Polyester (GRP), according to FOX’s drawings OXYGENATION CAPACITY O2 concentration in % of the saturation Outlet oxygen concentration : 700% of the saturation. Efficiency › 90%. Working pressure Texts and photos are not contractual. The information presented on this leaflet is subject to change without prior notification. FOX France Oxygénation 10, Résidence Kerdostin 29800 Saint-Urbain FRANCE Tél. & Fax : +33 (0)2 98 25 02 86 E-mail : [email protected] www.fox-aquaculture.com SAS au capital de 10 920 € RCS Brest 481 116 796 SIRET 481 116 796 00014 N° TVA