OXYFOX - SC
1Pages

CHARACTERISTICS Fabrication Glass Reinforced Polyester (GRP) Treated water flow Up to 380 l/s (1368 m3/h) fresh water O2 contents at the outlet Up to 300% of saturation Dimensions Height From 3 to 5 m Diameter From 0,6 to 2,2 m OXYGENATOR OXYFOX - SC OXYFOX is an oxygenator designed for aquaculture. This device has a very high capacity of dissolution of oxygen, using few energy. OXYFOX has been created to treat important water flows, and to cover the needs of a series of ponds, or even of the whole fish farm. OXYFOX both uses the energy of a water fall and the hydrostatic pressure in the depth of a well. The combination of these two factors unables to reach high D.O contents, with maximum efficiency. Where to install oxyfox ? OXYFOX can be installed on a by-pass of the main channel of a fish farm for example. In this case, the treated water flow is part of the general water flow. The mixed water downstream can reach high D.O contents (200 to 300% of saturation). OXYFOX can also be installed on an existing pump, or on a water fall. A water fall of 0,80 m to 1,50 m high is enough for a maximum efficiency. One or several pumps ? It is judicious to design the installation with two or three pumps, to adjust the treated water flow to the needs of the fish, but also for safety reasons. The equipment is designed in such a way that the outlet concentration remains optimum, when working either with one or several pumps. OXYGENATION CAPACITY Temperature 14 °C, efficiency 85%. Fresh water Fresh water Sea water Sea water FOX France Oxygenation 10, Residence Kerdostin 29800 Saint-Urbain FRANCE Phone & Fax : +33 (0)2 98 25 02 86 E-mail : foxaquaculture@orange.fr www.fox-aquaculture.com SAS au capital de 7.000,00 € o RCS Brest 481 116 796 o SIRET 481 116 796 00014 o N° TVA intracommunautaire : FR 03 481 116 796 Conception 1 Non contractual document - FOX France Oxygenation reserves the right to modify the specifications of its devices at any time.