INSTALLATION / HANDLING / MAINTENANCE LIST OF SPARE PARTS  E-mail: [email protected] [email protected] www.fpm-agromehanika.rs

WARNING TO YOU, USER By purchasing this tool you have made a wise choice. It is the result of many years of thinking, research and improvements. And you will, like thousands of other users, understand that now you possess the best that could be created by technique, knowledge and field testing. You have purchased a reliable tool, but only if you use it correctly, you can expect a good performance and long life. This Instructions Manual provides all the necessary information you need to achieve the best possible efficiency from your tool. The efficiency greatly depends on how carefully you read...

WARNING TO YOU, USER It is very important that the PTO which is connected to your belt hay rake is of appropriate dimensions. Therefore it is necessary to provide the PTO of the following characteristics: - joint 35 JUS M.L1.601 at the both ends of the PTO The PTO is the product of the company “Pobeda” FKL - Temerin and can be procured under the number: IMPORTANT: In case of failure to comply with the above mentioned warning, the factory is not responsible for the damage or breakage on the tractor, the PTO or belt hay rake.

READ CAREFULLY! In this Manual and on the tools you will find labels with warnings: “CAUTION”; “ATTENTION” and “DANGER”. Warnings are intended to draw your attention to the personal caution and caution of those who work with you because they need to read them, too. PERSONAL SAFETY CAUTION: ATTENTION: The word “CAUTION” is used where it is necessary to be cautious to protect the operator and others from an accident. The word “ATTENTION” indicates the possibility of serious injury to the operator and to staff that might occur suddenly. This is a word frequently used to alert the operator and other...

LIMITED WARRANTY The factory provides warranty in compliance with the Law on Standardization, Regulation on Technical Standards for Agricultural Machinery (Official Gazette No. 13/2010) for each original part of the new belt hay rake delivered to the customer by the sales network of FPM AGROMEHANIKA d.o.o. Boljevac by which it guarantees that, at the time of delivery, each part of the belt rake was new, without defects in material and workmanship and that for the belt rake it provides one-year warranty from the date of delivery to the end user, provided that the belt rake is used and serviced...

SAFETY Most accidents occurs during operation, maintenance and transport as a result of failure to comply with basic safety requirements. For this reason, you are the most important person for operation and maintenance of the belt rake, whether you work alone, with family members or other persons, be sure to read and observe the basic procedures for working with the belt rake that should also be heard by all others. In addition, the hay rake is provided with the warning labels that should draw attention to the obligation to observe safety. The instructions for operation, maintenance and safety...

While working, always keep away from all parts of the belt rake – take care of your arms, legs and clothes! Rotating assembly with the spring collectors or PTO can cause serious injuries. Never wear loose clothing that might be caught by the rotary parts of the belt rake. Clothing should fit to the body. The operator must be absolutely certain that no person, particularly children or animals are located in the area of working with the belt rake, before he starts the belt rake and starts working. One should always think about the consequences of irresponsible work, because they are irreparable....

SAFETY CONNECTING BELT HAY RAKE Before each connecting and disconnecting of the belt rake to and from the tractor, lock hydraulic controls to prevent any unintentional lifting or lowering. When connecting, pay attention to the category of the tractor and the connecting levers of the belt rake - they must be adjusted or to match. There is a risk of injury when connecting the connecting levers. When using external commands for hydraulics do not stand between the tractor and the belt rake. Observe and block the lateral movement of the connecting levers of the tractor during transport. When driving...

The following warning labels are placed on your belt rake to ensure your safety and the safety of people who work with you. By holding this Manual in your hand, walk around the machine and check these warning labels and instructions in the Manual. The labels must legible, otherwise replace them with the new ones. Identification of the belt rake is performed by the identification plate (label no. 2) containing the following numbers: - The field marked by letter “Z” contains the number of Certificate (document) on safety at work. - The field “MASA/WEIGHT” contains the weight of the product. - The...

BEFORE STARTING ADJUSTMENT, LUBRICATION OR CLEANING OF THE TOOL, TURN OFF THE TRACTOR, REMOVE THE KEY AND WAIT TILL THE MOVING PARTS STOP MOVING. BEFORE STARTING THE MACHINE, READ CAREFULLY THE INSTRUCTIONS AND PAY ATTENTION TO THE WARNINGS PROVIDED BEFORE STARTING THE MACHINE, READ CAREFULLY THE INSTRUCTIONS AND PAY ATTENTION TO THE WARNINGS PROVIDED. BEFORE STARTING ADJUSTMENT, LUBRICATION OR CLEANING OF THE TOOL, TURN OFF THE TRACTOR, REMOVE THE KEY AND WAIT TILL THE MOVING PARTS STOP MOVING. 5 ROTATING ELEMENTS! POSSIBLE BOUNCING OF OBJECTS TO OTHER OBJECTS AND PERSONS. KEEP AWAY FROM THE...

In this manual “left” and “right” is defined in Metric thread is used during installation. terms of the driving direction. Tighten all screws during installation. Belt hay rake is designed for collecting of the mowed grass mass (either dried or fresh) and collecting of the shredded maize after combine harvesting or manual harvesting for further shredding. The collecting is prior to the operation of baling by high-pressure presses, or a roll baler or self-loading trailers. This tool can also be used for raking, spreading and turning of the hay to shorten the drying time. Due to its good coping...