- Catalogs
- FPM Agromehanika
- MOTOCULTIVATOR
MOTOCULTIVATOR
MOTOCULTIVATOR
The FPM 410DS, 414DS, and 414DE motocultivators are designed for agricultural tasks such as viticulture, fruit growing, and municipal works. They feature a modern seven-speed gearbox and can be equipped with various attachments for diverse applications.
The motocultivator measures 1750 mm in length, 600 mm in width, and 1100 mm in height, weighing 195 kg. It includes a 7-speed gearbox, mechanical brakes, and can drive through both upper and lower shafts. The machine features adjustable height and width, 5.00x12" wheels, and a built-in "engine stop" safety mechanism. Accessories include wheel weights, wheel extensors, a trailer connector, and a universal tool attachment connector.
Manufactured by "21 MAJ" Belgrade, the engines are available in two types: 3DM 515 and 3 LD 450. Both are air-cooled, single-cylinder, four-stroke diesel engines with a nominal speed of 3000 min-1. The 3DM 515 has a power of 9.2 KW (12.5 hp) and a working volume of 515 cm3, while the 3 LD 450 has a power of 7.3 KW (10 hp) and a working volume of 454 cm3.
Safety is emphasized with warnings such as "WARNING," "CAUTION," and "DANGER." Operators must be familiar with all parts of the machine before use, and safety instructions must be strictly followed. Persons under 16 are not allowed to operate the machine.
Proper handling and maintenance are crucial for optimal performance and longevity. Regular checks and replacements of damaged parts with original components are recommended. The machine should be serviced by authorized technicians.
The motocultivator comes with a one-year warranty covering material defects, provided it is used and maintained according to the manual. The warranty excludes parts not manufactured by FPM Boljevac and consumable items.
The motocultivator can be used with various attachments, including ploughs, mowers, and trailers, allowing for diverse agricultural tasks. The aggregation of tools is simple and can be done by one person.
The motocultivator has multiple gears for forward and backward movement. The speed varies depending on the gear and the position of the steering column.
Includes components such as a mask, fuel tank, safety device, clutch control knob, steering wheel column, rubber wheels, engine starting pulley, and oil filter for air. The electrical system includes an alternator providing 24V AC voltage for illumination.
Uses a two-part dry clutch for smooth operation. The transmission mechanism includes multiple gears for different movement speeds.
Equipped with independent wheel brakes and a wheel blocker for turning. The brakes act as a parking brake and can be adjusted for optimal performance.
The steering column can be rotated 180º, but only towards the side opposite the exhaust pot to prevent cable damage.
Operators must familiarize themselves with the motocultivator's controls and maintenance procedures. Safety precautions include careful brake handling and ensuring proper adjustment of brake cables.
Before starting, check fuel, oil levels, and ensure the cooling system is clean. For cold starts, set the gas lever to 2/3, use the extra charging command, and pull the starting rope sharply.
The system operates on 12V with a 45 Ah battery. Regular maintenance includes checking electrolyte levels and ensuring clean, tight connections.
Heat insurers are installed at the ends of conductors.
Instructions for operating a motocultivator include holding the safety handle, adjusting the clutch lever, and managing the transfer rate.
To stop the engine, reduce the gas command to a minimum, allow the engine to cool for five minutes, set the gear knob to neutral, and release the safety lever.
Maintenance instructions include checking oil levels, changing oil regularly, keeping parts clean, and ensuring proper tire pressure.
Guidelines for storing the motocultivator include cleaning, oil replacement, part replacement, and ensuring the machine is not stored in humid or corrosive environments.
Instructions for safe driving with a trailer include necessary equipment, installation steps, and operational guidelines.
Details the necessary equipment and installation steps for using a rotary mower.
The document provides detailed instructions for the assembly, operation, and maintenance of various agricultural tools and machinery, specifically focusing on a motocultivator and its attachments.
Includes assembly and disassembly instructions, operation guidance, and maintenance tasks.
Includes multiple safety warnings, such as ensuring the engine is off before maintenance.
It is recommended to keep the drive mechanism and cutting machine assembled to save time on future setups.
Lists specific part numbers for each tool and attachment, providing a clear reference for ordering or identifying components.
Catalog excerpts
INSTALLATION/HANDLING/MAINTENANCE LIST OF SPARE PARTS e-mail: razvoj @ fpm-agromehanika.rs info @ fpm-agromehanika.rs fpmbolj@ eunet.rs Internet: www.fpm-agromehanika.rs
Open the catalog to page 1
WARNING FOR YOU, USER By purchasing this machine, you made a wise choice. It is the result of many years of contemplation, research and development. You, like thousands of other users, will realize that you own the best that the technique, knowledge and testing in the field has created. You bought a reliable machine, but only if you use it properly, you can expect a good performance and a long service life. This manual gives you all the information you need to achieve the best possible efficiency with your machine. This effect largely depends on how well you read and understand this manual and...
Open the catalog to page 2
Issued by: FPM AGROMEHANIKA AD Boljevac
Open the catalog to page 3
THE OPERATOR SHOULD COMPLY WITH THE SAFETY AND HEALTH PROTECTION REGULATIONS, AS WELL AS THE RULES ON ROAD TRAFFIC. IN THE OBJECTIVE OF YOUR OWN SECURITY USE THE ORIGINAL PRODUCTS PRODUCED BY FPM AGROMEHANIKA AD BOLJEVAC. THE MANUFACTURER IS NOT RESPONSIBLE FOR THE CONSEQUENCES OF INCIDENTAL USE OR NON-COMPLIANCE WITH RECOMMENDATIONS IN THIS MANUAL. READ CAREFULLY! In this manual and on the machine you will find warning labels, "WARNING" "CAUTION" and "DANGER". Warnings aim to draw attention to the personal caution and caution of those who work with you because they also need to read it. PERSONAL...
Open the catalog to page 4
user, provided that the machine is used and serviced in accordance with the recommendations in this INSTRUCTION MANUAL for maintenance and handling. 1.Parts not manufactured by FPM Boljevac (tires, plastics, belts, etc.) are not covered by this warranty, but by the manufacturer's warranty. 2. Parts that are normally consumed in exploitation: wedge belts, bulbs, etc. 3.- This warranty is invalid in case of poor use, incorrect or careless use or damage to an accident. The warranty ceases to be valid due to the use of non-original parts, and the factory is not responsible for the damage resulting...
Open the catalog to page 5
movement) and a lower shaft with an independent speed of 818 min-1 at 3000 engine rotations, which allows each work to be performed with the most economical speed. The universal gearbox can be used to aggregate gamma connection devices as follows: - transmission with rotors - universal connection for connection: - reversible plough - two-sided ridger - liner (working grasp 0.70 - 1.25 m) - potato machines - rotary plow with a drive from the output shaft to the tool - drive mechanism for mower cutting machines, working grasp 1.05 m; 1.30 m and 1.60 m. - rotary mower for parks (0 800 mm) - irrigation...
Open the catalog to page 6
- Persons under the age of 16 shall not be allowed to operate the motocultivator. - Before starting the engine, make sure that the lever for changing the gear is in - Every time before using the motocultivator, check that all parts (nuts, bolts and other) - All parts that have been damaged, and their elements for fastening (nuts, screws, etc.) in case of damage must be immediately replaced by the original parts of FPM - The working linkage of the motocultivator is attached to the basic machine only to the original link elements. - Before starting to adjust, lubricate or clean the drive or connecting...
Open the catalog to page 7
YOU MUST NEVER NEGLECT THESE WARNINGS WARNING: THIS SYMBOL IN A TRIANGLE SHAPE IS USED IN EVERY CASE WHERE YOUR SAFETY IS NECESSARY, AS WELL AS SAFETY OF OTHER PERSONS, AND IN ORDER FOR YOUR MOWER TO BE PROTECTED FROM RISK. REMEMBER TO READ WARNING WHEN YOU SEE THESE SIGNS. A - For the basic machine of the motocultivator - Pivot shaft height (for operating the tool) from the floor 280 mm - Weight of the motocultivator (with tires 5.00x12 ") 195 kg - Weight of extra weights for wheels 25 kg - 7-speed gearbox (5 for forward driving, 2 for rear-wheel drive) - Wheel roller with a differential, an...
Open the catalog to page 8
- Manufacturer and type "21 MAJ" Belgrade - Broj taktova - Working volume - Compression ratio - Cylinder diameter - Piston stroke - Fuel consumption in force NA - Engine weight - Engine start - Fuel tank volume - Permissible engine noise acc.to ISO R362 - Coupler - clutch MOVEMENT SPEED OF THE MOTOCULTIVATORA B A) - Position ot ine steering column is sucn that the engine is forward (viewed from the movement direction) TRANSMISSION DEGREE RUBBER WHEEL 5.00-12 Km/h NUMBER OF ROTATIONS OF THE CONNECTING DOORS AND ROTATION DIRECTION WHEN TRAVELLING FORWARD TRAVEL - FORWARD
Open the catalog to page 9
The speed of the motocultivator and the output shaft speeds at 3000 rpm
Open the catalog to page 10
3. Safety device "MOTOR STOP" 4. Clutch control knob 5. Lever for slow-speed travel 6. Steering wheel column 8. Point and half-link connection nut 11. Engine starting pulley 3. Upper output shaft 5. Inclusive speed lever 6. Shaft locking lever 7. Lever for the upper synchronous shaft 8. Lever assembly carrier 10. Fuel tank cover 11. Clutch coupling housing
Open the catalog to page 11
1. Intermediate-expander point (additional optional equipment) 2. Flanges of wheels 3. Clutch cable (clutch) 4. Upper synchronous shaft lever (caravan) 5. Dust brake 6. Oil scrubbing plug 7. Steering wheel fixing bolt 1. Wheel brakes 2. Speed limiter 3. Differential blocker 4. Steering wheel 5. Gas Command 6. Lever for turning the shaft to drive the tool 7. Handle cord for turning the steering column for 180º 8. Lever for "fast-slow" travel 9. Engine clutch levers 10. Safety lever "MOTORSTOP" 11. Steering wheel
Open the catalog to page 12
DESCRIPTION OF THE MOST IMPORTANT PARTS OF THE MOTOCULTIVATOR Before starting work with the motocultivator, it is necessary for the operator to get acquainted with the motocultivator, that is, the engine, the schedule of the controls, the manner of their use and the manner of handling and maintenance. ENGINE The FPM 408DS motocultivator is equipped with air-cooled four-stroke, single cylinder diesel engine, type 3LD450, factory "21 MAJ" Belgrade, power of 7.3 kW (10 hp according to DIN 70020) at 3000 min1, and in FPM 414DS, FPM 414DS 3DM515 , factory "21 MAJ" Belgrade, power 9.2 KW (12,5 hp according...
Open the catalog to page 13All FPM Agromehanika catalogs and technical brochures
OFFSET/IN LINE MULCHER2 Pages
HAY TEDDER2 Pages
POWER HARROWS2 Pages
GARDENING2 Pages
FPM Catalogue104 Pages
BELT HAY RAKE24 Pages
DISC MOWERS C48 Pages
UNIVERSAL MULCHER2 Pages
