Operating Instructions.

Introduction We are glad you have opted for one of our products. We wish you flawless and successful operation. ISARIA sensor system was especially developed to exactly determine the nutrient condition of crops and for optimising site-specific fertilization. The measuring process allows it to be used regardless of the time of day or weather. It is operated centrally using a special terminal. Any questions? We are looking forward to hearing from you. FRITZMEIER Umwelttechnik GmbH & Co. KG Dorfstraße 7 85653 Großhelfendorf Germany Phone Fax www.isaria-digitalfarming.com [email protected]...

PRO Active1.2 Notes on this manual1.2.1 General information This instruction manual contains all information and descriptions required to operate the system. We have taken special care during the creation of this documentation. We are grateful to receive any tips and suggestions you may have. To facilitate traceability, we have included illustrations, schematic representations of the machine and its assemblies to accompany the descriptions. This manual contains the following symbols: A ATTENTION: warns of a risk to persons and materials. Disregarding information marked with this symbol may result...

1 ISARIA (pre-assembled in transport case) 2 Terminal with bracket to attach to the vehicle and ISARIA operating software 6 Operating and maintenance manual 14 Connection cable, ISARIA power supply 15 Connection cable, terminal power supply 107 SD memory card (no fig.) Vehicle attachment, two options: 3 Three-point attachment console with rollers (for attachment to the three-point linkage) with 3x CAT II bolts - 4x screws similar to DIN6921 with locked toothed structure M12x30-8.8

PRO Active 4 Attachment console (for attachment to the vehicle's front loader bump protection) - 4x screws similar to DIN6921 with locked toothed structure M12x30-8.8 215 Three-point console (for attachment to the front weight) - 4x screws similar to DIN6921 with locked toothed structure M12x30-8.8 - 2x upper link pins - 1x short upper link

1.3 Assemblies and operating elements 9 Main frame with - 2 motors (side arm movement) - Socket for power supply cable 22 Power supply connection

The ISARIA is intended for determining the development stage of crops and for optimising inventory management. Every other use is classified as improper. Any conversions performed or add-ons fitted without explicit written approval of the manufacturer, the use of spare parts that are not genuine and repairs performed by any unauthorised persons or companies as well as modifications to the terminal* (operating system, software and hardware) may render the warranty void. * Updates to the operating system must be made with the explicit approval of the manufacturer. Mass storage devices that are...

Risks from using ISARIA There are the following hazardous areas on the system. Thoroughly instructing and training the operating personnel contributes towards minimising the risk to persons and equipment. Regular checks of the level of information and compliance with safety guidelines contribute considerably to a continuous accident-free operation. Risk of crushing and swinging out by electrically driven components Very high forces act on components moved by the linear actuators. There is the risk of injury and material damage. ISARIA may only be operated if the operator can see the entire hazardous...

ISARIA obstructs the driver's vision when fitted to the front of the vehicle. Please choose the installation position so that the vision is obstructed as little as possible, as defined in Art. 35b StVZO (German Highway Code). ISARIA workplace is located in front of the terminal. The operator must provide a suitable workplace with sufficient lighting in compliance with the relevant regulations.

Safety equipment ensures that no accidents or material damage occurs in order to protect personnel and product. The operator must ensure that - Trained personnel regularly check all safety equipment - Any faults detected on the safety equipment are rectified immediately - ISARIA is secured against restarting if not all safety equipment is present and ready for operation ISARIA is equipped with the following safety equipment: 11 Stop for transport The stop secures and stabilises the retracted side arms. position 12 Power supply Interruptible power supply. ISARIA must be disconnected from the power...

ISARIA features the following safety information stickers. The operator must at all times ensure that these are complete and in perfect, legible and recognisable condition. Warnings, stickers (Fig. 7), risk of crushing Size 13 Stop, transport position 25mm 13.1 Joint, side arm, visible when side arm is lowered 25mm 13.2 Joint, side arm, visible when side arm retracted 50 mm 13.3 Stop, transport position, on both sides of the stop 25mm 13.4 Joint, side arm, on both sides of the side arm 50 mm (Attachment of warnings on other side as mirror image)

Commissioning, assembly Commissioning, assembly The assemblies on ISARIA are large and partly bulky. A minimum of two persons are required for safe assembly and to avoid material damage. Attaching the device to a vehicle Fit the corresponding attachment console according to the selected attachment variant. The vehicle driver is obliged to comply with all regulations and guidelines required for participating in traffic. The following recommendations have been taken from the respective official texts but must not be considered as completely described. If in doubt, please contact us or any specialists....

Commissioning, assembly PRO Active Commissioning, assembly PRO Active 3.1.1 Attachment height To enable low crops to be accurately measured, the distance between the attachment points (112) at the console and the surface must be no more than 190 cm. Tip: We recommend setting the attachment height so that the top edge of ISARIA is flush with the top edge of the vehicle's engine compartment cover (Fig. 8). ^ The figure shows the attachment height for the other attachment Certain light sources (for example, pulse-operated work lights fitted on a coupler, such as LED work lights) can influence the...