Specification Overall Dimensions: Length (Std Machine) Width Height Weight (net) Power Supplies: Electric Drive amp PTO Drive speed External Hydraulic Split Force: Normal Operation Maximum 20 to 33 cm long Logs One machine does all Kindling as well Cycle Time: Adjustable via control knob minimum of 5.4 s at 40 lpm & 33 cm stroke Timber Input: Diameter 40 cm (16”) maximum diameter 10 cm (4”) minimum diameter Length 20 cm to 33 cm (8” to 13”) adjustable via separate kits Timber Output: Split Section size 20 to 120 mm See chart for volume output The above chart is based on continuous operation of the machine when processing a variety of timber diameters at the lengths shown and is quoted in solid cubic metres When split into logs, 1 solid cubic metre will give a loose volume of between 1.5 and 1.8 cubic metres Typical measured output is 1 cubic metre bulk bag filled in 5 minutes (equivalent to about 8 solid m3 / hour) Log and Kindling Production Machine designed to process large timber rings and convert them to Logs Ideal for handling Arb Waste Same machine can also produce kindling For further information, please contact Fuelwood (Warwick) Ltd., Claywood, Beausale, Warwick, CV35 7AF. tel: 01926 484673 www.fuelwood.co.uk [email protected] Designed and Made in Britain As part of a process of continual product improvement, specifications may change without notice

Splitta 400 Options POWER VERSION FEED CONVEYOR OUPUT CHUTE MANUAL BAGGA LENGTH KITS ELECTRIC DRIVE EXTERNAL HYDRAULIC DRIVE External Hydraulic Version Splitta 400 is a fully automated splitting machine that splits timber rings using an ‘X Blade’. This ensures a consistent section size of the split timber regardless of the input diameter. This section size is adjustable to allow the Operator to vary the split output between kindling and small logs through to large logs. Can be used with any hydraulic power source that meets the specification and has cooling • Supplied with 3 metre hydraulic hoses...