Es kann so einfach sein. DATA SHEET FOR THE GDS 3 MAIN MODULES agangl GDS 3 hydro Specification: Category I, Category II Hydraulic plug-in couplings double-acting hydraulic mechanical locking chop (hook linkage with fixation) Arresting the main module to the instrument module. Coupling the Hydraulic is possible from the cab. locking the unit by a mechanical locking chop GDS 3 hydro plus Specification: Category I, Category II Hydraulic plug-in couplings double-acting hydraulic hydraulic locking cylinders with locking chop Locking pin for additional security of the locking chop Technical data: Weight: 58 kg Tractor equipment: An independent doubleacting control circuit A control circuit for double acting hydraulic top link. Technical data: Arresting the main module to the Weight: 61 kg instrument module. Tractor equipment: Coupling the Hydraulic and locking the unit by a hydraulic cylinder, Two independent doublepossible from the cab. acting control circuit A control circuit for double acting hydraulic top link Technical data: ■ Main Module Category I, Category II ■ hydraulic outlets ■ hydraulic lock cylinder with lock picks and ball valve ■ removable inside module (GDS 3 inside) ■ Sliding component with drive shaft ■ Centring module and sliding module mechanical (manual postpone the drive shaft with lever mechanism) ■ Locking pin for additional security of the locking hook Arresting the main module to the instrument module. Coupling the Hydraulic and locking the unit by a hydraulic cylinder, possible from the cab. The drive shaft is pushed by a lever mechanism. Weight: 86 kg Tractor equipment: Two independent doubleacting control circuit A control circuit for double acting hydraulic top link Drive shaft: Brand: Bondioli & Pavesi Type: G7 Profile: 1 3/8 "Z = 6 540U/min max. 2900Nm Technical data: GDS 3 master plus Specification: ■ Main module Category I, Category II ■ hydraulic outlets ■ Manifold with control valves DM: 401 (electrically switchable) ■ switchable "+", 3-phase plug ■ hydraulic locking cylinder ■ Accumulator, ball valve, components, etc. ■ removable inside module (GDS plus 3 inside) ■ Sliding component with drive shaft ■ Centring module and sliding module with a hydraulic cylinder DW ■ Locking pin for additional security of the locking hook Arresting the main module to the instrument module. Coupling the Hydraulic and locking the unit by a hydraulic cylinder, possible from the cab. The connection of the drive shaft is fully automated with the GDS 3 Master plus model. Weight: 88 kg Tractor equipment: An independent doubleacting control circuit (swimming and grid position) A switched "+" (Included) A double-acting control circuit for hydraulic top link Drive shaft: Brand: Bondioli & Pavesi Type: G7 Profile: 1 3/8 "Z = 6 540U/min max. 2900Nm Allg. technische Daten: Cat I: 660 mm - 810 mm Cat II: 825 mm - 930 mm Max. 132 kW (180 hp) GDS GmbH Fritz-Knoll-StraBe 3 A-8200 Gleisdorf Tel.: + 43 3112 38 940 Fax: -90 [email protected] Errors and omissions excepted.

Es kann so einfach sein. DATA SHEET FOR GDS 3 EXTENDING MODULES GDS 3 valve ■ Manifold (electrically switchable) ■ switched "+", 3-phase plug Causes the hydraulic pressure to operate the diversion chop and additional features of the module and to the hydraulic on the equipment. Technical data: Savings: 1 oil pressure control module on the tractor Technical data: GDS 3 inside Specification: Sliding claw Drive shafts and sliding module with mechanical lever mechanism Bearing with springs housing with mounted drive shaft To install on the main module Drive shaft Extension to GDS 3 master....