Due to its space-saving design and precise controllability, the MONO RIMBO finger joystick is the ideal solution in limited installation space. The single-axis joystick‘s cap is available in several colours and can be laser-engraved with both standard and customer-specific symbols. The modular design allows it to be used in a wide number of industrial applications. The three-position latching function makes the MONO SCATTA ideal for use as a direction switch. Subject to change without notice | Version of 11 23 Latching in 3 positions Angle of rotation ± 30° Contactless Hall-effect sensor technology Two analogue signals, X characteristic Sensitive control Ergonomic design Protection class IP 68, except plug Long service life of 5 million cycles EMC in accordance with EN 12895: 2015-09 EMC 100 V/M in accordance with ISO 11452-2 Functional safety in accordance with EN ISO 13849, PL d Gebrüder Frei GmbH & Co. K

Transmission protocol Voltage Direction y V supply (5 V) 90% V supply -30°C to +65°C -40°C to +85°C 0.09 Nm 8.5 Nm 3 million cycles IP 68 (except for the plug-in connector) EN 12595: 2015-09 100 V/M in accordance ISO 11452-2 Connector pin assignment Molex Mini-Fit Jr.TM 4 pin, dual row 39012040 PIN 1 +5V PIN 2 GND PIN 3 Signal 1 PIN 4 Signal 2 5 V DC ± 0.02 V 4.5 – 5.5 V DC (ratiometic output) < 50 mA X characteristic: 0.5 – 4.5 V DC Power current Analogue output @5 V Operating conditions Operating temperature Storage temperature Maximum force Actuation force Service life Protection class Dimensions...