PACTO

PACTO

PACTO

Product catalog summary
Overview: The document provides technical specifications and details for the Joystick PACTO, manufactured by Gebrüder Frei GmbH & Co. KG. It highlights the joystick's ergonomic design, modularity, and suitability for various applications, including customer-specific uses.
Specifications:
  • Technology: Contactless Hall-effect sensor technology.
  • Axes: Two axes with two analogue signals per axis.
  • Design: Ergonomic with a protection class of IP 65 when mounted (excluding plug).
  • Service Life: 4.0 million cycles for the joystick, 1.0 million cycles for the button.
  • Standards: EMC in accordance with EN 12895 and functional safety in accordance with EN ISO 13849, PL C.
Technical Data:
  • Mechanical Data: Dimensions are provided in the drawing, with a mechanical angle of rotation of ± 20°C.
  • Electrical Data: Rated voltage is 5 V DC ± 0.02 V, with an operating voltage range of 4.5 – 5.5 V DC and power current less than 25 mA.
  • Analogue Output: Ratiometric X characteristic: 0.5 – 4.5 V DC.
  • Operating Conditions: Operating temperature ranges from -28°C to +65°C, and storage temperature from -40°C to +85°C.
  • Force: Maximum force is 0.25 Nm, and actuation force is 20 Nm.
Connector Pin Assignment:
  • 8 pin, single row configuration.
  • Pins include Button out, Button in, Signal 2 – 2, Signal 2 – 1, Signal 1 – 2, Signal 1 – 1, GND, and +5 V.
Order Data: Part number for the PACTO Joystick is 3111-012S3-XX.
See more

Catalog excerpts

PACTO-1

Due to its ergonomic and robust design, the Joystick PACTO offers a wide range of installation options. Its modular design and sensitive control allow it to be used ergonomically with the full hand. Further characteristics of the Joystick PACTO are its intuitive use and its long service life. Besides being used in the ACTRA JOY PLUS armrest, the Joystick is predestined for use in customer-specific applications. In addition a micro switch is available on the top of Joystick PACTO. These could be used for e.g. Horn-, release- or customer specific- functions. Änderungen vorbehalten | Stand 11 23 Contactless Hall-effect sensor technology Two axes Two analogue signals per axis, X characteristic Ergonomic design Protection class IP 65 if mounted, except plug Long service life of 4.0 million cycles except Button (1.0 million cycles) • EMC in accordance with EN 12895 • Functional safety in accordance with EN ISO 13849, PL C Gebrüder Frei GmbH & Co. KG

 Open the catalog to page 1
PACTO-2

Transmission protocol Nominal operating voltage (5 V) 9 90% Nominal operating voltage [V] Pin 6 10% Nominal operating voltage [V] Elec Nominal operating voltage (5 V) 9 90% Nominal Neutral position operating voltage [V] Pin 4 10% Nominal operating voltage [V] 0V Elec 9 Connector pin assignment 8 pin, single row PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 Dimensions [mm] Contactless hall sensors 64 Button out Button in Signal 2 – 2 Signal 2 – 1 Signal 1 – 2 Signal 1 – 1 GND +5V Gebrüder Frei GmbH & Co. KG 72461 Albstadt -28°C bis +65°C -40°C bis +85°C 0.25 Nm 20 Nm 4.0 million cycles 1.0 million...

 Open the catalog to page 2

All Gebrüder FREI GmbH & Co. KG catalogs and technical brochures

  1. VITATIO

    2  Pages

  2. STIPO

    2  Pages

  3. DITEGO

    2  Pages

  4. INTEGO

    2  Pages

  5. PIEGO

    2  Pages

  6. ROTONDO

    2  Pages

  7. UNIVERSAL PRO

    2  Pages

  8. UNIVERSAL

    2  Pages

  9. PREMO UNITY

    2  Pages

  10. WARO UNITY

    2  Pages

  11. XENO

    2  Pages

  12. MONO SCATTA

    2  Pages

  13. MONO VIBRO

    2  Pages

  14. MONO RIMBO

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.