UNIVERSAL PRO TRACTION SWITCH The UNIVERSAL PRO traction switch is a setpoint de- vice for electrically powered vehicles and is predestined • Non-contacting Hall-effect technology for use in harsh environmental conditions due to its • Integrated microswitch for the body completely protected electronics and the use of non- protection switchfunction contacting Hall-effect technology. • Ideal for use in TEMO 600 and TEMO 200 Besides the analogue signal for the travel speed set- • Two digital direction signals point, the traction switch also provides two digital direc- • One analogue signal for travel speed tion signals. Using an integrated microswitch, a body • Output characteristics: single ended protection switch function can be implemented in the • Nominal supply voltage: 12/24/36/48 VDC tiller head. • Greater protection against environmental influences • Protection class: IP 57 • Sealed connector available Subject to change without notice | Version of 12 21 Gebrüder Frei GmbH & Co. KG

Electrical data Operating voltage range Power current Analogue output Max. current Digital outputs for direction 1/2 Max. current Body protection switch Max. current Operating conditions Operating temperature range Max. actuation force Service life Emergency reverse button Throttle axis Vibration test/shock EMC Protection class (IP) Characteristic curve (single ended signal) Contactless via Hall sensors +UB See drawing ± 45° Square axle of size 6 x 6 mm 10-pin. FLRY 0.5 mm² with Molex Mini-Fit Jr. (standard), or Tyco Mini-Universal Mate-n-Lok, sealed (see versions below) 12 – 60 V (-30% / +20%)...