The WARO UNITY accelerator pedal was designed for • Contactless via inductive sensor a wide range of vehicles, particularly in the fields of • Redundant output signal agricultural and construction machinery. The sensor and • Protection class IP 6K9K, plugged connector the electronics are located in a sealed housing and are • Mechanical angle of rotation 17° and 20° possible thus completely protected against water and dust. This • Available in different colors allows it to be used in applications that are subject to • Wall-mounted design especially tough ambient conditions, for example in mobile machinery, cranes and excavators. Furthermore, the simple attachment of the wall-mounted pedal by means of three bolting positions allows it to be installed in the vehicle quickly and straightforwardly. Subject to change without notice | Version of 04 23 Gebrüder Frei GmbH & Co. KG 72461 Albs

Technical data Technology Mechanical data Mechanical angle of rotation Dimensions Mating connector Electrical data Nominal operating voltage Power current Overvoltage resistance Output signal Output signal Contactless via inductive sensor Electrical characteristic curve 100 % 17° or 20° ±1.2° See drawing YAZAKI 7283-1968-30 6 Pin 5 V ±6% Max. 10mA each channel 16 V Characteristic curve, see on the right 2 x analogue ratiometric Output signal synchronism tolerance: max 3% Operating conditions Operating temperature Storage temperature Initial force Maximum force Protection class 5 V supply: Sensor...