RS5 19 telescopic handler
RS5 19 telescopic handler
- Approximate Weight: 10,000 lbs. (4536 kg)
- Dimensions: Length - 12'4" (3.8 m), Width - 5'11" (1.8 m), Height - 6'4" (1.93 m)
- Ground Clearance: 14" (350 mm)
- Wheelbase: 7'6" (2.29 m)
- Turning Radius: 11'0" (3.35 m)
- Fuel Capacity: 17 gal. (64 L)
- 12.00 x 16.5 Bias/10 PR
- 12.00 x 16.5 Bias/10 PR Foam-Filled
- 12.00 x 16.5 Solid Rubber
- Lift Capacity: 5,500 lbs. (2495 kg)
- Maximum Lift Height: 19'1" (5.8 m)
- Capacity at Maximum Lift Height: 3,000 lbs. (1361 kg)
- Maximum Forward Reach: 11'0" (3.4 m)
- Capacity at Max. Forward Reach: 1,850 lbs. (840 kg)
- Manufacturer: Yanmar
- Power: 69 hp (50.1 kW)
- Model: 4TNV98C Tier IV
- Rated Speed: 2500 rpm
- Transmission: Rexroth 2-speed
- Maximum Travel Speed: 15 mph (24 km/hr)
- Steering: 4-Wheel, 2-Wheel, Crab
- Brakes: Hydraulically Actuated Internal Wet-Disc Brakes (2-Wheel), SAHR Parking Brake on Front Axle
- Axle Manufacturer: Dana
- Pump Type: Gear
- Total Capacity: 20 gpm (76 L/min)
- System Pressure: 3350 psi (231 bar)
- Hydraulic Reservoir Capacity: 18 gal. (68 L)
- Boom Control Joystick
- Fork Tilt Joystick
- Reverse Warning Horn
- 2 Speed Forward/Reverse Hydrostatic Drive
- Engine Temperature, Fuel, and Hourmeter Gauges
- Planetary Axles with Limited Slip Front Differential
- Full Time Four Wheel Drive
- Engine Block Heater
- Power Steering
- Selective Steering (Front Wheel, All Wheel, and Crab)
- 12-Volt Electric System
- Automatic Self-Leveling Fork System
- A: 5,500 lbs. (2495 kg)
- B: 4,000 lbs. (1815 kg)
- C: 3,000 lbs. (1361 kg)
- D: 2,000 lbs. (908 kg)
- E: 1,850 lbs. (840 kg)
Gehl reminds users to read and understand the operator's manual before operating any equipment. Ensure all safety devices and shields are in place and functioning properly. For more information, contact Gehl at 1-800-628-0491 or visit gehl.com.
Catalog excerpts
TELESCOPIC HANDLER CAPACITIES Lift Capacity (kg) Maximum Lift Height (m) Capacity at Maximum Lift Height (kg) Maximum Forward Reach (m) Capacity at Max. Forward Reach (kg) Max. Reach Below Grade (mm) GENERAL SPECIF ICATIONS Manufacturer Yanmar Power (kW) 69 hp (50.1) Aspiration Natural Model 4TNV98C Tier IV Rated Speed 2500 rpm COMPONENTS Approximate Weight (kg) 10,000 lbs. (4536) Length – Less Forks (m) 12'4″ (3.8) Width (m) 5'11″ (1.8) Ground Clearance (mm) 14″ (350) Wheelbase (m) 7'6″ (2.29) Turning Radius (m) 11'0″ (3.35) Overall Height (m) 6'4″ (1.93) Frame Leveling N/A Fuel Capacity (L) 17 gal. (64) Transmission Rexroth 2-speed Maximum Travel Speed (km/hr) 15 mph (24) Selective Steering 4-Wheel 2-Wheel Crab Hydraulically Actuated Internal Wet-Disc Brakes 2-Wheel Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle Axle Manufacturer Dana TIRE OPTIONS HYDRAULIC SYSTEM 12.00 x 16.5 Bias/10 PR 12.00 x 16.5 Bias/10 PR Foam-Filled 12.00 x 16.5 Solid Rubber Pump Type Gear Total Capacity (L/min) 20 gpm (76) System Pressure (bar) 3350 psi (231) Hydraulic Reservoir Capacity (L) 1
Open the catalog to page 1
TELESCOPIC HANDLER Boom Control Joystick 5,500 lbs. (2495 kg) Capacity Fork Tilt Joystick 3,000 lbs. (1361 kg) Capacity at Full Lift Height SAHR Parking Brake Maximum Lift Height - 19 ft. 1 in. (5.8 m) Reverse Warning Horn 2 Speed Forward/Reverse Hydrostatic Drive Engine Temperature, Fuel, and Hourmeter Gauges Planetary Axles (Limited Slip Front Differential) Right Hand Side Mounted Rear View Mirror Full Time Four Wheel Drive Engine Block Heater Two Wheel Wet Disc Brakes Inline Glow Plug Cold Weather Start Power Steering Left Hand Front Fender Selective Steering (Front Wheel, All Wheel, and Crab)...
Open the catalog to page 2All Gehl catalogs and technical brochures
TRACK LOADERS7 Pages
ARTICULATED LOADERS7 Pages
Compact excavators14 Pages
Gehl VitalTRAC™12 Pages
SKID LOADERS13 Pages