Conical outlet Flat bottom outlet Silo wall outlet In- and outlets for water storage systems Conical in- and outlets A conical in- and outlet consists of a ground plate and a conical sleeve which can be pulled tight on the pipe. They are made from the same material as the liner. Conical in- and outlets are available in several materials and diameters for water storage silos and reservoirs. Installation set Every conical in- and outlet is being supplied with an installation set consisting a roll of Genastrip and a roll of Genatape. Together they provide a water tight connection. Flat bottom outlet A flat bottom outlet is designed for emptying the silo completely for example in case of maintenance. The flat bottom outlet consists of a ground plate with central placed a tube of Ø110 mm. Features conical outlets:     Tube diameter of Ø 32 till Ø 500 mm, special diameters on request. Ground plate: 1,00 mm. Sleeve: 0,5 mm. Suitable for angles of 45° till 90°. Silo wall outlet reinforcement plate In- and outlets can also be placed through the wall of the silo. This has consequences for the strength of the silo wall, therefor we advise to use a tank wall outlet reinforcement plate. These are available in several diameters. Genap BV – PO Box 27 – NL 7040 AA ’s-Heerenberg – T +31 314 661644 - sales@genap