Vat Mixer Assembly Instructions

Product catalog summary

Assembly Instructions for Mixer System

1. Mixer Controller Installation
Remove the nuts located at the bottom of the mixer controller and secure it to the pivot mount.

2. Motor Attachment
Attach the mixer motor to the adjustable tilt mount using the two bolts on the motor's face. Ensure the shaft rests in the mount's notch.

3. Tank Clamp Setup
Insert the shaft of the adjustable tilt mount into the top hole of the tank clamp. Then, insert the platform into the lower hole of the tank clamp.

4. Double Rod Clamp Connection
Attach the double rod clamp to the motor assembly's shaft. Insert the controller assembly's shaft into the double rod clamp.

5. Propeller Installation
Slide the 3/8” propeller shaft into the motor's chuck and tighten it at the desired height.

Catalog excerpts

Vat Mixer Assembly Manual

Open the catalog to page 1

Pivot Mount Remove nuts on bottom of mixer controller and affix to the pivot mount Mixer Controller

Open the catalog to page 2

Attach the mixer motor to the tilt mount using the two bolts on the face of the motor. The shaft rests in the notch of the mount.

Open the catalog to page 3

Tank Clamp Insert shaft of adjustable tilt mount in to top hole of the tank clamp

Open the catalog to page 4

Insert platform into lower hole of tank clamp.

Open the catalog to page 5

Insert shaft of controller assembly into the double rod clamp Attach double rod clamp to the shaft of the motor assembly

Open the catalog to page 6

Propeller Shaft Slide the propeller shaft into the chuck on the motor and tighten at the appropriate height

Open the catalog to page 7

Vat Mixer Assembly Instructions

Vat Mixer Assembly Instructions

Catalog excerpts

All Genepro inc catalogs and technical brochures