RTK BASE STATION GEOMETER GNSS RTK base station based on dualfrequency GM SMART L1/L2 receiver. Can be used as a receiver and transmitter that transmits satellite corrections to any RTK rover. The presence of two frequencies L1 and L2 provides a high level of accuracy and initialization time - the time required by the receiver to obtain a solution when working in RTK mode. This will allow you to focus completely on your work, as you can always be sure of the reliability of the equipment. SPECIFICATION Number of channels: 698 Sattelite systems: GPS: L1C/A, L2P, L2C; GLONASS: G1, G2; GALILEO: E1, E5b; BEIDOU: B1I, B2I/B3I Rovers connected at the same time: unlimited Data transmission channel: GSM Range: 50 km and more Power supply : Power 220V + Embeded battery up to 30 hours RTK Initialization time: < 10 s Range of working temperatures: -40°C to + 85°C Dimensions (mm): 175х340х55 mm The specification of the base station can be changed at the request of the customer. The functionality of the base station can be changed by singlefrequency or multi-frequency GNSS board. www.gpsgeometer.com | +38 050 842-61-65 (WhatsApp, Viber, Telegram