Fig. 1) Front and rear attachment – without displacement Working widths from 1.20 to 2.50 m The all-new flail mowers of the VMS series are designed as flail mowers for tractor sizes from 22 KW. Maintenance-free bearings on the scanning roller and flail shaft, a newly developed flail shaft bearing and an optionally mounted wear protection liner testify to the latest technology. The modular design of the VMS series provides a high degree of flexibility in the design of the mowers. You will always find the right mower for your purpose of application. Fig. 2) Front and rear attachment with displacement...

Less dust generation due to scanning roller repositioning Optionally, the scanning roller on the front attachment devices can be attached further back so that the mulch is deposited in front of the scanning roller. Fig. 5) Scanning roller normal position This significantly reduces dust generation, especially when using during the dry period. This way, the radiator contamination in tractors is lessened. Fig. 6) Scanning roller attached further back The right flail type for your range of application Weight basic device (kg) required minimum hydraulic power (ltr./bar) E-point linkage category Front-rear...

Technology for environmental landscape maintenance and agriculture GERHARD DÜCKER GMBH & CO. KG 48703 Stadtlohn, Wendfeld 9, Germany Telefon 0 25 63 / 93 92 - 0 Telefax 0 25 63 / 93 92 90 E-Mail [email protected] Internet www.duecker.de 04/2020 - Oing-Druck - Rights reserved for changes and further developements.